Hi

in the settings of my Octavia 3 I can activate "Light assist" when I turn on full headlights it shows me "Light assist default"

I have xenons and I have something that corresponds to a camera under the rain detector

Here is part of the auto scan with Vcds, only the faulty parts:

 

 

  Part No SW: 5G0 857 511 D    HW: 5G0 857 511
  Component: FLA           H04 0002  
  Revision: AA001001    
  Coding: 02018F6B76765D525220343E01
  Shop #: WSC 73430 031 00000
  ASAM Dataset: EV_HighBeamAssisAU37X 001009
  ROD: EV_HighBeamAssisAU37X.rod
  VCID: 2B55B2AB420539CB4E-807E

2 Faults Found:
0782 - Internal Control Module Memory Check Sum Error
         B2000 00 [009] - -
         [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
         Confirmed - Tested Since Memory Clear
            Freeze Frame:
                   Fault Status: 00000001
                   Fault Priority: 3
                   Fault Frequency: 1
                   Mileage: 88621 km
                   Date: 2019.05.21
                   Time: 14:55:43

4186126 - Internal Control Module Memory Check Sum Error
         B2000 49 [009] - Internal Electronic Failure
         [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
         Confirmed - Tested Since Memory Clear
            Freeze Frame:
                   Fault Status: 00000001
                   Fault Priority: 3
                   Fault Frequency: 1
                   Mileage: 88621 km
                   Date: 2019.05.21
                   Time: 14:55:43

 

 

 

The first bus fault makes me think that it is surely linked to the second

 

And the last 2 faults give me the impression of a module that needs to be replaced or misconfigured.

 

 What do you think ?

 

 Thank you so much

SorrySorry I made a mistake when copying the fault scan, a big piece is missing at the beginning (and I can't edit my first message) :

 

 

 

 

Address 09: Cent. Elect. (J519)       Labels:| 5Q0-937-08X-HV1.clb
   Part No SW: 5Q0 937 084 AA    HW: 5Q0 937 084 AA
   Component: BCM MQBAB H   H14 0112  
   Serial number: 00011326300823 Dataset Number: 5E0063t____ 0048
   Coding: 0C011B42424722FB07A04000000C07280808000000000000000000000000
   Shop #: WSC 131071 1023 2097151
   ASAM Dataset: EV_BCMCONTI 011001
   ROD: EV_BCMBOSCH_011.rod
   VCID: 77FD5EDBCECD4D2BFA-8022

   Wiper motor control module: 
   Subsystem 1 - Part No SW: 5E1 955 119     HW: 5E1 955 119   Labels: 5QX-955-119-V1.CLB
   Component: WWS371 130914  041 0570 
   Serial number:         130925135701
   Coding: 065DDD

   Rain/Light Recognition Sensor: 
   Subsystem 2 - Part No SW: 5Q0 955 547     HW: 5Q0 955 547   Labels: 5Q0-955-547.CLB
   Component: RLFS  024 0042 
   Serial number: Y13M09D26H22M29S13S1
   Coding: 02805D

1 Fault Found:
535060 - Databus 
          U1123 00 [009] - Received Error Message
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 176
                    Mileage: 115889 km
                    Date: 2023.12.05
                    Time: 08:56:43

                    Terminal 15 status: On
                    Terminal 50 status: OFF
                    CAN-Bus_aktiv: On
                    Status Bremslichtschalter (HW): OFF
                    Status Bremslichtschalter (CAN): OFF
                    OFF: Not operated
                    Position lamps: Not operated
                    Automatic high beam assist: operated
                    Low beam: Not operated
                    Parking light left: Not operated
                    Parking light right: Not operated
                    last_wakeup: Pin C14 Kessy Weckleitung
                    Voltage: 11.8 V
                    Outside temperature: 6.0 °C

Address 20: High Beam Assist. (J844)       Labels:| 8X0-857-511.clb
   Part No SW: 5G0 857 511 D    HW: 5G0 857 511 
   Component: FLA           H04 0002  
   Revision: AA001001    
   Coding: 02018F6B76765D525220343E01
   Shop #: WSC 73430 031 00000
   ASAM Dataset: EV_HighBeamAssisAU37X 001009
   ROD: EV_HighBeamAssisAU37X.rod
   VCID: 2B55B2AB420539CB4E-807E

2 Faults Found:
0782 - Internal Control Module Memory Check Sum Error 
          B2000 00 [009] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Mileage: 88621 km
                    Date: 2019.05.21
                    Time: 14:55:43

4186126 - Internal Control Module Memory Check Sum Error 
          B2000 49 [009] - Internal Electronic Failure
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Mileage: 88621 km
                    Date: 2019.05.21
                    Time: 14:55:43

Ho i have skoda octavia combi 2010 1z5

This is my module

Address 44: Steering Assist
Part No:1K0 909 144 J
Component: EPS ZFLS Kl. 68
Revision: 00H17000
shop #:wSC 73430 790 00000
VCID:3169A0C3A8295305FC-8064

 

This is information for module with version EPS_ZFLS Kl. 000  3001

Is the same settings;;;;;;

 

Control Module Replacement
Address 44: Steering Assist
Part No: 1KO 909 144 J
Component: EPS_ZFLS Kl. 000  3001

Channel 002: Malfunction Indicator Lamp (MIL)
Possible Settings:
■2-Color Lamp (Standard)
■1-Color Lamp
Channel 003: Driver Steering Recommendation (DSR)
Possible Settings:
■Driver Steering Recommendation (DSR) active (only ESP MK60 & MK60-AT)
■Driver Steering Recommendation (DSR) inactive (only ASR MK70)
■Driver Steering Recommendation (DSR) active (only ESP MK60EC1 & MK60 AWD/4X4)
Channel 004: Installation Park Steer Assist
Possible Settings:
■Park Steer Assist (PR-7X5/7X6) installed (< MY 2009)■Park Steer Assist (PR-7X5/7X6) installed (MY 2010>)■Park Steer Assist (PR-7X0/7X1/7X2) NOT installed
Channel 005: Torque Steer Compensation (TSC)
The Torque Steer Compensation (TSC) is only being activated for Front-Wheel-Drive (FWD) Models which I Function prevents the Car from leaning into one Direction while Accelerating in Combination with powerfu Shafts.
Possible Settings:
■ Torque Steer Compensation (TSC) inactive (Standard)
■Torque Steer Compensation (TSC) active
Channel 006: Installation Lane Assist
Possible Settings:
■Lane Assist (PR-7Y0) NOT installed
Lane Assist (PR-7Y2/7Y4) installed
Channel 008: Installation Adaptive/Dynamic Chassis Control (DCC)
Possible Settings:
■Adaptive/Dynamic Chassis Control (PR-2H0) NOT installed
■Adaptive/Dynamic Chassis Control (PR-2H1) installed
Channel 009: Steering Angle Sensor
The Adaptation Channel determined the Functionality of the internal Steering Angle Sensor. Depending on
Brake Electronics the internal Steering Angle Sensor needs to be deactivated.
Possible Settings:
■Internal Steering Angle Sensor active
Internal Steering Angle Sensor inactive
■Internal Steering Angle Sensor inactive (only ASR MK70)