Nearly completed changing out the window winder plate assembly on front passenger door of my Fabia Estate. Stuck though on a stupid thing. I can't get get the cable bellows back on the Apost. Reluctant to remove drivers side to see in case I  In the give myself another problem lol. 

In the door I have fitted the bellows over the white plastic surround and clipped it home. However at the A post end there does not seem space to fit anything over the plugs. I must have something wrong somewhere. Can another kind person point me in right direction please.

 

Cliff

Can't remember if the door end of the bellows clips onto a different coloured fitting, but the A-pillar end is a white frame. Maybe you have the bellows the wrong way round?

The key to success is to have the white frame engaged fully onto the rubber bellows and then clip it in, rather than fitting white frame first and then struggling to get the rubber onto it.

This video may be useful, showing removal and refitting of A-pillar end, I think:

 

Thank you for this Pete. I had seen that video and seeing it again shows me I have done nothing wrong but just can't clip it in place. Possibly impatience or hamfistedness on my part lol.

Anyway thank you once again.

 

Cliff