Hi, anyone know the part Number of this plate? I nead one and i can’t find anywhere.

thanks in advance 

I am not sure but looks like

VAG 047 109 271 

Raitening plate

That’s for a Fabia, Felicia is the same or similar to Favorit, but i can’t find part Number on ETKA neither on dealership

25 minutes ago, Madureira said:

That’s for a Fabia, Felicia is the same or similar to Favorit

 

https://webautocats.com/etka/skoda/fel/101/103500/

 

Felicia 1.3, take a look at No51

 

https://webautocats.com/etka/skoda/fel/101/115000/

 

 

Edited 31 October, 20241 yr by D.FYLAKTOS

No, that is inside the valve cover, so the oil can spread, the one I'm looking for doesn't appear in this diagram and is on the outside of the valve cover, it is high enough for 3 head screws and has ears to lift the engine

this is the yellow circle and I need the one in the red circle

12 hours ago, D.FYLAKTOS said:

Felicia 1.3, take a look at No51

 

https://webautocats.com/etka/skoda/fel/101/115000/

17 minutes ago, nta16 said:

Not the right part, as said before:

7 hours ago, Madureira said:

No, that is inside the valve cover, so the oil can

 

 

I've been only able to find number of a similar part in Skoda Estelle - 113032313. It's reffered to as a "holder". While I was able to find image of the correct part in the Favorit catalogue (it's under the air filter category instead of cylinder head), part number for the entry was missing.

Edited 1 November, 20241 yr by Papez

7 hours ago, Madureira said:

it is high enough for 3 head screws and has ears to lift the engine

 

Unfortunately i can't find anything.

Keep in mind that it happened to me in the past, i was looking for a part inside the air filter box and in no ETKA site i could find the part number.

 

By the way that part that you are looking for is broken?

Can not take it from a donor vehicle?

3D metal printing isn't convenient?

1 hour ago, D.FYLAKTOS said:

 

Unfortunately i can't find anything.

Keep in mind that it happened to me in the past, i was looking for a part inside the air filter box and in no ETKA site i could find the part number.

 

By the way that part that you are looking for is broken?

Can not take it from a donor vehicle?

3D metal printing isn't convenient?

I don't have that part because in the past when they changed the head gasket they didn't replace it, and as I need to change the head gasket again I wanted that part because I don't know if it doesn't help to put homogeneous pressure on the head against the block and not just pressure in the screw area

1 hour ago, Papez said:

Not the right part, as said before:

 

 

I've been only able to find number of a similar part in Skoda Estelle - 113032313. It's reffered to as a "holder". While I was able to find image of the correct part in the Favorit catalogue (it's under the air filter category instead of cylinder head), part number for the entry was missing.

I think I saw all the favorit and felicia diagrams on etka and didn't find any part number references, and yes it will be a holder. my hope is that someone on the forum still had a Felicia and could see the part number

Unfortunately all the sites give this

 

https://www.lllparts.co.uk/catalogs/skoda/CZ/FEL/101/1/115/115000

 

I will check mine if has a part number on it but i am not optimist.

32 minutes ago, D.FYLAKTOS said:

Unfortunately all the sites give this

 

https://www.lllparts.co.uk/catalogs/skoda/CZ/FEL/101/1/115/115000

 

I will check mine if has a part number on it but i am not optimist.

Thanks

Just checked, sorry, same round mark on the left but no part number anywhere. 

4 hours ago, D.FYLAKTOS said:

Just checked, sorry, same round mark on the left but no part number anywhere. 

thanks anyway

I will measure the dimensions of mine and you will go to the press to make yourself a new bracket... 

7 hours ago, Thefeliciahacker said:

I will measure the dimensions of mine and you will go to the press to make yourself a new bracket... 

i Will apreciate