Hi all, need some help.. I’ve got a kodiaq 2.0tdi 2021 sportline. When taking a sharp left turn, i’m getting some grinding noise coming from driver side front. Things i’ve checked are below.. Any other suggestions?

- Has new suspension strut and mount

- Had new wishbone and ball joint and droplink

- Has new cv joints (inner and outer)

- Had new wheel bearing

- Checked using a gopro style camera to see if the driveshaft was possibly touching the anti roll bar but it wasn’t

- Checked brake disk shield isn’t touching, even removed it completely

- Checked is not the wheel scraping on anything

-full lock the car in both directions and don’t get any noise, just when turning fast and the weight goes onto the right side of the car

- Check shaft isn’t hitting/touching the shaft cover next to the inner cv joint

- When turning normally i have no issues, it’s when i take a sharp turn or the vehicle weight shifts onto the driver side

-Subframe all bolted down properly using collar kit

- Inner and outer track rod was replaced

- No engine rumbling/shaking so don’t think it’s engine mount.

Any help or ideas as to what it could be?

Were any of the many others threads no help?

Hi,

I’ve had a very good read of all of them hence having to create my own post unfortunately.