Clarity on Number of AIRBAGS -

Dear Experts , Can any body advice me if I am missing anything , my understanding is below about AIRBAGS ( total 4 airbags Skoda 13 Plate Monte Carlo 1.2 Petrol , cbzb engine code )

1. Passenger Side

   A. Front passenger thorax airbag

B. Passenger side airbag ( Inside Seat on left side near neck )

2. Driver side :

   A. Driver thorax airbag (Inside Steering)

   B. Driver side airbag ( Inside Seat on right Side near neck )

3. VCDS Tracks below info for driver side and Passenger side

   Driver Side :

   A. Driver thorax airbag igniter ohm value-Measured Value Resistance :Resistance value in Ohms

   B. Driver thorax airbag igniter-Measured values : Correct/Low/High

   C. Driver side airbag igniter ohm value-Measured Value Resistance:Resistance value in Ohms

   D. Driver airbag igniter-Measured values : Correct/Low/High

   E. Driver side belt tensioner igniter ohm value-Measured Value Resistance :Resistance value in Ohms

   F. Driver seat belt tension igniter-Measured values : Correct/Low/High (TooLarge,TooSmall etc.. terminology using by VCDS)

   G Driver seat belt switch-Measured values : Connected/Not Connected

   H Driver belt tensioner ohm value-Measured Value Resistance 2.  :  Correct/Low/High

4. Passenger Side :

   A. Front passenger front airbag igniter-Measured values : Resistance value in Ohms

   B Front passenger thorax airbag igniter-Measured values: Correct/Low/High

   C. Passenger side side airbag igniter ohm value-Measured Value Resistance:Resistance value in Ohms

   D. Frt.pass. side belt tensioner igniter ohm value-Measured Value Resistance:Resistance value in Ohms

   E. Frt.pass. belt tensioner ohm value-Measured Value Resistance 2: Resistance value in Ohms

   F. Front passenger seat belt tensioner igniter-Measured values : Resistance value in Ohms

   G. Front passenger side safety belt switch-Measured values: Installed /Connected/Not Connected

   H Passenger belt tensioner ohm value-Measured Value Resistance 2.  :  Correct/Low/High

I have compared my vcds log with other from same engine code and it is matching so it means my coding for ECU is perfect.

Please advice if I am missing anything .

Thanks regards