Skoda fabia 1.4 vrs (dq250 swap) help!

Hi my name is Josh, I am doing a skoda fabia 1.4 vrs 2010, rebuild. I am not doing a rebuild because of piston ring land failure, but more as a prevention measure. I noticed there is not much videos on YouTube. So I am documenting it to post for others to see. I will keep you guys who want to see the video updated when I upload it.

I wanted to do a DQ250 swap. But it's hard finding a guide or a post of what was done from start to finish.

I know I need a DQ250, but is it only the DQ250 from a 1.4 tsi like the touran 1.4 tsi dsg and the golf mk5 1.4 tsi dsg (DQ250) that will fit? Or will others fit from the 2.0 tsi and 1.9tdi/2.0 tdi group fit?

I read somewhere the left side drive shafts is fine to use from the DQ200 but, will need different drive shafts for the right side. From what vw/audi car? Or does it need to be a custom drive shaft for that side?

Also the shifter, can the DQ200 shifter work on the DQ250 gearbox?

I understand about the flywheel, starter motor, DQ200 to DQ250 plug, coding and the oil cooler.

If someone who has done this mod before, can you please get back to me. I would really appreciate it. Thank you