Went to see Phil at Powerflow in Stafford this morning.

Had the car on the ramps to look into the twin system. No problems for him to do it.

Cost is

how are they getting round the issue of the tow loop?

Couple of questions?

As Kenny said how is the tow hook problem solved?

Is the original exhaust location moving to the left?

is it going to be symetrical to look at?

If all this is ok.

I will be having mine done on the 5th of may!!!!

Just a thought, i think there will be a very big interest in this, would you ask him if he would do discounts for group buys??

Mike

I'd be interested... I would even go as far as to put holes through the old one to justify this with Mrs Q

A bit O/T but seeing as everyone is getting rid of their OEM exhaustdoes anyone know if their would be any benefit in bolting one to my 1.6?

A bit O/T but seeing as everyone is getting rid of their OEM exhaustdoes anyone know if their would be any benefit in bolting one to my 1.6?

Not sure it comes off in one piece

Would the pipe from the cat back make any difference?

I saw a two pice octavia in Southampton so it is possible

To get the exhausts to look the same he is moving the passenger side exhaust to the left.

Bodyshop are going to plastic weld the pieces that get cut out for the new pipes to fill the hole for the existing tailpipe then blend it in.

Is the bodywork being done for the included price??

Cheers

Mike

He has included to cut the new holes in the bumper but not to sort out the old one.

Maybe having some changes to the rear bumper anyway so my mate will be doing it

To get the oem exhaust off the octy vRS it needs to be cut in 2 places otherwise you cant get the old one over the back beam. When mine was taken off they left enough pipework so that it can be put back on at a later date using sleeving around the pipes.