Hi all,Is there anyone out there with a FMIC on their furby VRS that would mind posting some pics of it and the way the pipework is routed etc.

Have a lovely alloy intercooler that will fit a treat on my car but just need some assistance on the pipework front any advice/pics will be greatly appreciated !

Cheers

Tris

What sort of size is the IC? Anywhere near the size of the Forge one or maybe the Allard one? Does it have the intake and outlet on the same side of does it flow through?

It flows from one side to the other,The Ic itself is the same size and is a rea nicel quality one.

Why the roll eyes?

Ideally, for easiness, you want to follow the oem path. This means piping into it in the same place as the SMIC does. If you outlet comes out pointing toward the nearside, you need to bring it back under/over the IC to join back up with the oem turbo pipe. Mine comes out the top of my IC and goes through the engine bay. I'm also confused by the ":rolleyes:" - I wouldn't have been able to answer without knowing the entry/exit points.

Why the roll eyes?

Ha sorry m8 thought it was a smiley,my apologies !!!

Ideally, for easiness, you want to follow the oem path. This means piping into it in the same place as the SMIC does. If you outlet comes out pointing toward the nearside, you need to bring it back under/over the IC to join back up with the oem turbo pipe. Mine comes out the top of my IC and goes through the engine bay. I'm also confused by the ":rolleyes:" - I wouldn't have been able to answer without knowing the entry/exit points.

My apologies also ,thought it was a smiley didnt see the rollie eys bit

So where does the lower pipe come through,Ive looked at a couple of Fab Vrs's and cant seem to work out how you get the lower pipe through the bit between the wheelarch liner and the space behind the front bumper.

Cheers

Tris

If your making up custom pipes its only a matter of a bit of trimming.

If your making up custom pipes its only a matter of a bit of trimming.

Just like to see a few more pics so I can see where Im at before I get going on it,If it was my old J plate 205 Gti I havent got a prob with hacking that about here and there to get bits to fit,But my 07' Plate Furby Vrs ,Now thats a different matter !

Cheers

Tris

Just like to see a few more pics so I can see where Im at before I get going on it,If it was my old J plate 205 Gti I havent got a prob with hacking that about here and there to get bits to fit,But my 07' Plate Furby Vrs ,Now thats a different matter !

Cheers

Tris

If you look on Forge's site for the Fabia FMIC, the fitting instuctions are on the site too, which may hekp you see where that one goes.

heres mine its a seat sport but again exit on the same side

Cheers Mike,that helps a great deal ! Spot on fella !!

Will let you all know as things "Develop" ,Currently have PD160 Air intake,Green cotton filter and De-cat pipe,Want to get it remapped next probably after Christmas thinking about taking it to Impossible performance in Medway,couple of my customers have been there and were really pleased with the outcome.

Thanks again

Tristan