I've got some colour coded sensors for my vrs. Have any of you who have fitted these kept a record of their size and where they fitted them in relation to the split line. Mine are 20mm dia and 20mm under the head with the wire coming out of the centre. I was hoping to fit them 25mm below the split line and 350mm between centres. I removed one of the vent thingies in the spare wheel housing to get my hand in to assess clearance etc and there is a steel spar running across just where I wanted to drill very close to the plasic bumper. Any help much appreciated.

see the excellent fitting guide on Fabia-vrs.com - Home Page

this is the link: Fabia-vrs.com - Park Distance Control RetroFit Guide

HTH

Bas

Yikes - looks a lot of work...

I wouldnt bother if you need parking sensors on a super-mini surely you should give up driving and get public transport?

All the best anyways, i fitted an aftermarket set to a Volvo, was a pain in the backside!

For spacing I would measure the bumper to find the centre point and then work from there.

Well I qualify for a bus pass this year!