I tried the search, but didn't find what I was looking for. So, don't shoot me if this already had been covered I instaled an aftermarket alarm + remote to my 2004 fabia. All is working fine, but I am supposed to wire the blue wire from the alarm to my door switch. Can anyone tell me how I am supposed to do this? And sorry for any mistakes, I am not english

Thank you

maybe a mod can move this to the ice and security section, might get a better reception/reply ther........ p.s i aint got a clue

This thread may be of use to you:

http://briskoda.net/forums/technical-guides/remote-central-locking-installation-guide/84559/

Additionally, if you give us a bit more information about what make the kit is and what the wire does, and if possible the circuit diagram, we may be even more helpful!

Cheers

Rob

This thread may be of use to you:

http://briskoda.net/forums/technical-guides/remote-central-locking-installation-guide/84559/

Additionally, if you give us a bit more information about what make the kit is and what the wire does, and if possible the circuit diagram, we may be even more helpful!

Cheers

Rob

I have seen this guide, was very useful. But, it only covers remote central locking, I also have an alarm. And I must wire the blue wire, to the door switch, so the alarm knows when the doors are open, so it can re-lock if I accidentally unlock the car. So I just need to know what wire tells the car the doors are open .)

OK, I'm taking my locking system apart this weekend, I'll see if I can help you then.

So, you need +12v going to the blue wire when any door is open, is that right?

Cheers

Rob

OK, I'm taking my locking system apart this weekend, I'll see if I can help you then.

So, you need +12v going to the blue wire when any door is open, is that right?

Cheers

Rob

well, the manual says the blue wire is for negative door triggering, but if I connect it over the lights, I should change polarity. I have no idea how to do that

Thank you in advance, most kind of you