Hello all, just a few pictures and how to replace the badge front and rear badges.

Front install -

1) From inside the engine bay, drill the 2 little plastic lugs.

2) Use dental floss and from the outside place behind badge and use a sawing motion to remove the old badge, PS this take some doing.

3) clean the surface area, removing the old glue / tape

4) remove plastic lugs from rear of new badge

5) place new badge on

6) I used a glue gun on the inside of the badge / 2 holes to double secure the badge.

7) stand back and admire the new badge

Rear badge install

1) again using dental floss place behind badge and use a saw motion

2) there is 2 plastic clips in the middle area

3 remove enough glue / tape and then using fingers remove badge

4) clean area again

5) re install new badge

6) admire be proud and relax for the rest of the day

Edited 17 June, 201411 yr by D5KSY

Thanks for the tips! I've got a new boot badge on order so the timing couldn't have been better.