Skip to content

Colin170CR

FREEDOM
  • Joined

  • Last visited

Everything posted by Colin170CR

  1. Yep I would concur with that. The new fog bulbs are looking much more like the main beams now, if not a bit brighter / whiter. Close up inspection of the original Bi-Xenon main headlight inner lenses shows that they do look a bit cloudy. Need a clean perhaps? I'm wondering whether I should consider changing the Bi-Xenon's for LED's or, leave well alone? Looks like changing the drivers side is fairly straight forward but the passenger side involves removing front wheel & wheel arch liner to get to the back of the headlamp unit as under bonnet access is very tight😒. I think I will leave alone until the weather gets a bit warmer. Not the time of year to be messing about in the cold on my drive.🥶 For reference below is a Ali Express link for the replacement Fog LED bulbs I used. Fairly cheap at £9 but so far so good. The car is in for it's 8th MOT today @71.5k🤞 https://www.aliexpress.com/item/1005006840794986.html?spm=a2g0o.tm1000027143.appPushSupportRecommend.3.71cc6a77QFScA6&gps-id=appPushSupportRecommend&scm=1007.67346.516855.0&scm_id=1007.67346.516855.0&scm-url=1007.67346.516855.0&pvid=0fd4b796-753d-4d2d-8e4d-cf5800ec5718&_t=gps-id%3AappPushSupportRecommend%2Cscm-url%3A1007.67346.516855.0%2Cpvid%3A0fd4b796-753d-4d2d-8e4d-cf5800ec5718%2Ctpp_buckets%3A668%232846%238110%231995&pdp_ext_f=%7B%22order%22%3A%2271%22%2C%22eval%22%3A%221%22%2C%22sceneId%22%3A%2257346%22%2C%22fromPage%22%3A%22recommend%22%7D&pdp_npi=6%40dis%21GBP%218.13%218.13%21%21%2110.37%2110.37%21%402103849717951015968395942e0ef6%2112000038479188887%21rec%21UK%213413154159%21XZ%211%210%21n_tag%3A-29919%3Bd%3Addd822d5%3Bm03_new_user%3A-29895&utparam-url=scene%3AappPushSupportRecommend%7Cquery_from%3A%7Cx_object_id%3A1005006840794986%7C_p_origin_prod%3A
  2. I took my ill fitting R/H trim piece back off again today. It came off a lot easier the 2nd time around. Straight pull with two hands & gloves on did the trick. Seems one of the locating barbs had bent over preventing the trim from fully seating. I bent the barb gently back out & refitted it. It's fine now. As D402 said above, dropping the front underside tray is another option to get access from the back. Not easy scratching around on the floor trying to find all the retaining screws for the tray unless the car is jacked up or on a ramp but, it's doable as an alternative option.
  3. Don't know yet. Not had the car out on the road since I replaced the fogs.
  4. Finally. After much cursing, swearing, copious amounts of WD40, plastic trim removal tool insertions / prodding & general faffing about for nearly 2hrs I managed to get the dam things off the car to access the fog light units. Surely it shouldn't have to be that hard? Installed LED bulbs which look great & now match factory headlights. However, one re-installed trim cover is not sitting quite right. The chrome strip is not flush with the corresponding piece on the lower bumper☹️. I'll leave it for now but my OCD will not allow it remain like that. More faffing required after I thaw out & have a cup of tea 🫖.
  5. Yep. I'm going to give that a go. LED fogs waiting to go in 🤞
  6. Thanks. Yes it's a pre-face lift 2016 model. Looks easy doesn't it. However, mine won't budge. The whole front bumper is flexing when I pull on the trim & both sides are not coming out. The cold weather is probably not helping (currently 1-2c on my driveway & raining hard) so I'm going to try & warm the trim up a bit with hair dryer / heat gun & use a thin plastic trim removal tool where those locating tabs are. I just don't want to break the tabs as the guy in this video did 😒
  7. Nice to have would be my thoughts on this. My 2016 L&K 280 had DCC as standard & I use it quite a bit. I normally run the DCC in Sport mode (fairly stiff setting) but with the DSG in normal D mode. If I hit some bad road surfaces then I change DCC to Normal or possibly Comfort mode for a more compliant ride. I also do this when I have passengers in the car that might not appreciate the stiffer setting. Comfort mode does make it feel very "wallowy" though so I can't run it that mode for too long without feeling a bit sea sick!! As others have said the only downside will be the cost to replace the DCC shocks vs stock dampers. There are some after market DCC damper options now so you are not suck with OEM only. Touch wood, after 10 years my DCC still works fine.
  8. Hi all. I've watched the vids that show how to pull off the trim pieces next to the fog lights, but mine seem to be stuck fast. I really don't want to yank on them too hard in this cold weather & risk breaking any of the securing tabs. One of the vids I watched the guy did just that & broke off the securing tabs when pulling on the the trim with a pair of pliers. Other owners have used their fingers but mine are not budging. Apart from the extra chrome bits, are the L&K front fog access trims different in the way they secure from any other models? Are there any hidden pry points etc? If anyone's got any ideas where I should be prying / pulling & with what tool to help get these trim pieces off I would much appreciate any info you can provide. Cheers.
  9. I declared my stage 1 Revo ECU remap (+80bhp) to my insurance company a few years ago & have changed insurer since then a couple of times. No increase. Having said that some insurance company's won't touch anything that's modified these days so best to check before diving in only to find out bad news later on.
  10. That was quick. Neat little device for not much money I thought.
  11. It's doing well if 5+ years old. After the problems we had with my wife's EV 12v battery (2 x AA call outs for no start events) I fitted this battery monitoring device so I could keep an eye on the battery health. Of course with a new battery everything is fine but it's a peace of mind type thing for when battery get older. https://www.amazon.co.uk/dp/B08VHMJYXY?psc=1&ref=ppx_pop_dt_b_product_details
  12. The first sign of a weak battery is that the Stop-Start (if turned on) stops working, even after a long run.
  13. It's a common problem with many makes of car. I'm on my 3rd battery for my 2016 Superb & 2nd battery for our 2022 Hyundai Kona EV. OEM batteries are generally cheap rubbish designed to just get through the 3 year warranty. Hyundai/Kia EV's have had 12v battery issues for a while. Interestingly, although our Hyundai Kona car has a 5 year warranty but the 12v battery has only 3 years warranty (8 years on the traction battery). I think Hyundai knew they had installed a !"$£ battery so reduced the 12v battery warranty accordingly. It now has a 5 year warranty Halfords Yuasa battery. Fitted it myself & no coding required.
  14. Topped mine up at Tesco the other day. 99Ron Momentum is up to £1.84☹️. Using my wife's EV as much as possible at the moment.
  15. I've been looking at the Epiq for a while now. It could be the replacement for my wife's current '22plate 64kWh Kona EV. I need to test drive one because the main reason we want to change is the Kona's ride which is so bouncy & jiggly. The Kona's short wheel base & stiff springs / shocks don't help it at all. Fine on smooth roads but we don't have many of them in the UK. The Epiq is about the same length but with a much bigger boot & a slightly smaller battery / range. We currently are getting 4.7miles/kWh out of the Kona (no heat pump) which is is going to be hard to beat. None of our local dealers has an Epiq in their showrooms yet. However, the order books are open if you want to buy one? Why would someone order a car without seeing one in the flesh or taking it for a test drive? Our next car could be our first ever lease car as well.
  16. I had to get my MK3 280 4x4 L&K wheel alignment checked after I noticed some really bad rear tyre wear soon after I got the car at 2.5 years old. The inner tyre shoulder was down to the canvas on on both rears. However, there was still 3-4mm of tread depth on the outer shoulder & majority of the tyre tread. Very difficult to see the inside tread wear from outside the car unless you get the car up on a ramp or get under it. I took mine to a local alignment specialist with a 4 wheel Hunter setup. Apparently it's a well known issue with many VAG group cars that use the same back end suspension & the factory isn't that precise on how they set up the camber at the rear. Mine was out by quite a few degrees. Not had any rear tyre wear issues since (6 years & counting).
  17. Beats me. Obviously not serious enough for a fail in my case so they just advising me. According to my indi garage the spring mounts are a corrosion failing point on many VAG group cars.
  18. Snap. My 2016 280 L&K estate is at 76k & is also developing a few funny noises over rough surfaces, mainly from the back. I can't pin down where it's coming from yet but, like you, I suspect a few suspension items / bushes may need replacing soon. It's still on the original DCC shocks & springs although the springs have been advisories on the last 2 MOT's for corrosion. Best I get on a run is 36mpg & 26mpg for local stuff. Revo stage 1 software for 360bhp has not altered the mpg & I run it on 99RON all the time. I still love the car & it's probably time to give it bit more love & a decent detail valet & paint protection.
  19. Ditto but mines Black so it shows everything. We had two rounds of Sahara sand in the last few weeks. All but gone now after some rain so just road grime & other debris to sort. After washing & paint correction in the next few days I'm going to attempt some Graphene protection. Failing that I might treat the old girl to a paid detail clean & ceramic coating to make keeping her clean at home easier.
  20. Sounds about right. Similar situation for me a few weeks ago. Christmas tree of dashboard warning lights turned out to be be 2 x ABS sensors front & back. Expensive bill at independent VAG garage.
  21. Yep. I'll probably hold off on a replacement for a while longer. We are using my wife's Kona EV more & more as it's so much cheaper to run & is easier to get in & out of with my worsening back issues. I've never been a fan of SUV's but they are much better for getting in & out of as you get older.
  22. I got my Superb A/C serviced when the car was last serviced as part of a £1,009 bill!! AC service included fresh / replacement gas, UV dye compressor oil, new pipework O rings & pollen filter (£85+vat). Rest of my bill was for the basic car service (£170+vat), front discs & pads (£260+vat) & 2 x ABS wheel sensors (£326.24+vat). It's 10 years old now so some bigger bills incoming. Advisories on front lower suspension arm bushes, rear coil spring corrosion at common fracture point. I'm thinking about replacing it, maybe with my first lease car. Don't know what I fancy as yet. Maybe an Elroq.
  23. My centre caps are fitted with the optional tape trick as well. Been on for years now because I wasn't sure what diameter my wheel centres were (56,57,58mm) when I ordered replacement caps.
  24. When it came time to sort my wheels out I got my L&K Trinity 19" diamond cut wheels powder coated gloss black to match the car paintwork. Cheaper than getting the wheels refurbed & diamond cut to the original spec & powder coating is a more durable finish. Also makes the car look a bit meaner.
  25. Me also. My old CR170 diesel estate (FWD) was quick but had almost uncontrollable front wheel scrabble in damp / wet conditions, in the dry also if the front wheels were angled for a left / right turn at a junction. This was especially noticeable at roundabouts when you wanted to get into a gap quickly but were left stationary with the font tyres spinning in the wet! It also meant the front tyres took a bit of a beating with replacements fairly frequently at circa 20k intervals. So after 150k miles in my CR170, & with retirement looming, I wanted a smoother petrol 4 x 4 estate. Enter the 280! The 280 has no wet weather tyre scrabble or traction issues whatsoever. Believe me I have tried!! There is / was a bit of DSG hesitation when setting off from a standing start but that can be mitigated a bit by using Sport mode. I had a Revo Stage 1 remap (360bhp) done a few years ago & I have fitted a RaceChip Throttle / pedal box which eliminates any DSG hesitation altogether. The RaceChip box was swapped from my wife's Karoq 1.5 DSG 4 x 4 when we sold it which suffered from terrible DSG take off hesitation. Now the take off & acceleration of the 280 in sport mode is somewhat "savage" which makes it a bit of a hooligan as it hangs on the the gears much higher up the rev band. As you said, in normal Drive mode the torque comes in as a smooth linear progression for more relaxed but equally fast progression which negates the need to use Sport mode in all but exceptional circumstances. By contrast, my wife has a FWD Kona EV which has 201bhp & 291 lbft (395Nm) of torque. It's quick but even in Normal drive mode in the dry in a straight line the front tyres struggle for grip. In Sport mode it's almost undrivable in the wet. My wife went through the front tyres in 13k miles! It's now set in Eco mode which eliminates the tyre scabble & it's still plenty quick enough. The current model 64kWh Kona EV's have the same 201bhp power but a reduced amount of torque (188 lbft / 255Nm)! I wonder why? Not sure I could go back to a higher power 2WD car now?

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.