Jump to content

DanialA11

Members
  • Posts

    533
  • Joined

  • Last visited

Everything posted by DanialA11

  1. What controller would I go to enable this
  2. Had 6000k on mine there not blur but there not white either? Look good if you have some led side lights that claim to be white but are actually blue
  3. Sorry to hijack the thread but where would u be able to purchase the rear cup holder from ? Non in ebay so isit a dealer only part
  4. R-tec are mento be the masters of vag cats Custom remaps for every car and have owned a golf stage 2 R-tec and the power delivery was amazing, haven't heard anything bad about them till this day
  5. No mate they will not they need to be good quality canbus error free
  6. Is there a how to guide on how to replace the alarm siren as I would love to have a chirp on lock and unlock
  7. Just asking as I seen on alot of other forums of the option bi xenons without shutters is not there then just add 10 to the original hex value However after that o found out you can use lcode2
  8. Can someone with a pre - fl that has access to a vcds check something for me PLEASE When ticking the option bi xenons without shutters on byte 3 bit 4. Does vcds add 10 the hex value, hex value being the 2 digit number that is the bytes?
  9. The lead I am selling you plug into the rear of headunit The only function you will loose is cd changer When u pull your original headunit out there will be 3 plugs the smallest blue one as shown on the video above will be replaced by the aux plug I will provide Yes PayPal will be fine
  10. You could buy mine and buy a male to female adapter to make life easier ?
  11. How would you check your steering controller is compatible for cc, plug vcds and click what ?
  12. Here is the link I used Skoda Octavia Stream Modification:
  13. I got mine of eBay however it is no longer on there as said before I have a spare you can have for £8 Also there is a video on YouTube to show removal of cd player and aux installation
  14. Couldn't find the link but this is the male adapter I got if you won't it just give me a inbox and can get it posted out to your foe £8
  15. Here is the link to purchase unlock code http://pages.ebay.com/link/?nav=item.view&id=231288708123&alt=web
  16. The code you can purchase of eBay for £10.99 as I done the same for my pre fl skoda There are really 2 types of leads you can buy off eBay the female and male connectors I used the female connector and pulled out the blank next to the pass airbag light then drilled a little hole and screwed it in to give it a factory flush look I will find the eBay add when I'm home and post it here for you
  17. This should help http://www.briskoda.net/forums/topic/324958-octavia-mkii-dash-panel-fuse-details-2006-19pd-lk-estate/?p=3894949#entry3894949
  18. My car did not have the byte 3 bit 4 Doing sme research come across a few audi forums You are mento add 10 to the hex value So when you open long coding helper and use arrows to go up and down the byte ' s you see the box that has the 2 digit numbers one box will be yellow follow by the rest green this is the hex value so when you get onto byte 3 the 2 digit number will be yellow So say for example the number there is 12 add 10 on that will be 22 then close the long coding helper and click do it and bobs your uncle Someone can clarify this if the option byte 3 bit 4 xenons without shutters is available on there car if they tick the box they will see 10 add on to the value and if they untick then 10 will be minused hope this helps
  19. Camskill.co.uk is the place where I got my tyres £55 a corner for something never heard off is a joke I paid £50 Each fitted for some land sail ls something or other and they had good reviews as my car is only a 105 bhp I wernt to bothered but for £70 could of got some vredistines
  20. Did you clean the surface and dry it before taping the plates on How I usually would do it is to cut 4 slightly smaller then plate vertical strips stick then on plate Then stick plate onto car and apply force all around for about 30 seconds
  21. For my 2005 pre fl octavia I purchased 2 501 w5w led bulbs for map reading lights at front and 2 for boot,I belive it was 2 42mm festoon led bulbs one for front and one for rear For the pre fl any cheap 99p lights will do however , numberplate lights have to be canbus error free
  22. There should only be very slight play and I mean VERY SlIGHT Best way to check for me has been jack car up from suspect wheel try wobble side to side and then up an down if there is a noticeable difference from one wheel compared to opposite side wheel then the one with play needs attention
  23. How to program mk5 VW remote key fob keyless entry using ross tech VCDS: That's the link if anyone would like to program a key for there car
  24. Done using vcds and a how to 1min video on you tube works great
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.