pompom

after 1st fill, do the adapation and run the car a bit. Then fill another time, you should get another 100ml in.

after you replace the sensor, you need scan tool to clear the faulty code as well. I have done that, 10 mins job, easy

i recently changed mine, 5 mins job. no more exhaust smell in car now

It's the connector between bumper and fluid bottle. Did you recently do a bumper off job?

is the rear in 45mm-75mm adjustable zone according to b16 installation manual?

I recently bought this from aliexpress, very good quality

need rear boot line protector now

leyo which is expensive

i had same problems when doing it. Just keep trying to put in the security code at first or when it pops out, can't remember when i typed in

Anyone knows where can get real carbon fiber one?

engine on select the sport mode first, turn the engine off then ignition on to code the exhaust flapper on. google the proper procedure for Golf r should help It's Tuesday now:-)

i have it at 1850rpm, most likely it's drone

try aliexpress with rubber door seal, works great with little money.

My stage 2 dq250 in D shifts around 2100, S shifts around 3800. Car feels super nimble on highway in D/S when doing overtaking

237kw at wheels

i always have plan in my mind since day 1 when i tuned my superb, if my turbo blows I will go straght to stage 3 with TT V5 with a differnet tuner. happy ending

I did B pillar today, there is a slot just underneath the screw area, so if you drop the screw, you will be safe, just need a long neck pier to take it out which i just did.

I have a stage 2 MY17 280 sportline. current with muffler bypass pipes, sound really nice atm, but still no dsg fart. Valve open it acts like muffler delete, no drone on highway speed. i also put sound deadening in the boot well to tam the noise. stock noise level in cabin while crusing, but roaring when underload. I am thinking building a BCS like sport version resonator section, twin 10'' long and 4" width resonators , one with 3" inlet/out, other with 2'inch inlet. i am also considering the muffler style in the last pic, however i get conflict information about factory valve size. In skoda superb, the valve size is 2.25" instead of 2.5" in golf mk7 r

just check youtube video about intercooler installation. you will get some idea, I would say it is not a DIY job for most of us with basic car knowledges. but the front mount type should be ok for DIY

I have superpro 24mm version on the harder setting with superpro endlinks.

yeah, not huge but it does filter some frequency. Now there is only tyre noise and exhaust noise left

did some boot and rear seat deadenings today, you can notice some improvements

stock is 235/40/19, i am thing 255/35/19 which much more similar spec to stock instead of 245/40/19. ps4 which should be last a big longer than ps4s

i am thinking about 255/35/19 instead

FYI some aftermarket intake will have problems with upgraded intercooler. R600 is very tight fit