Krosta

Hello, If you don't have virtual cockpit (Active info display), you also won't be able to switch between Phone, Navigation, Car info etc. in your cluster. Heated steering Wheel requires different Steering column with second front connector, different connector to the Steering column unit, pin position changes, wire new power for the steering Wheel and coding Definitely not plug and play for Heated Steering Wheel.

https://mibsolution.one/#/1/9/MHI2 - HARMAN/Firmware/Skoda - user guest, password guest. If it is really Columbus MIB2.5 -> latest SW is "MHI2_ER_SKG13_P4526_MU1440.7z" Download it, unzip to sd card, put in radio, long press menu, SW update, top right click update, choose sd card and after 20-25 min. done

I think that about the buttons, but I am not sure about this. And about the part number. I have this 5Q0 959 760 F (without massage of course) so I would try to look for 3Q0 959 760 with index A,B,C ... not sure, which was the most

Button is not needed to be changed. Or I think that, because I tried that - by changing only the buttons and it works the same (like third settings). It is just different visualization, nothing else. The function of third settings (button with 3 or massage) depends on 3Q0 controller settings

I would say, that tutorial is simple, if you never did this, don't do this even know. Don't want to sound rude, just realistic It is very easy to do something, which will be irreparable. Maybe you could find out someone, who is close to you and do this for you for a small charge Replace front radar for 3QF Flash X file corresponding for 3QF radar Do CP Add swaps via tool on the site Upload dataset Done For example on my car it was done. The man charged 250€ for doing this - I just replaced the radar and everything else was done wirelessly. I just needed VAS5054/VAS6154 (diagnostic cable). It was done in 30 minutes (there was a complication with my diagnostic cable, it could be done quicker), after that I did test drive and it was a success. After confirmation, that everything was working, I paid him.

Exactly, this radar is not suitable for pACC. And yes, it can be changed to 3QF, but I am really not sure, if it is possible to retrieve the previous swaps back, because it is totally different HW. I mean, that you will need after that to add three swaps - for Front Assist version, ACC version and pACC. After that "only" coding and maybe to add the dataset. And of course to remove component protection. With the instruction on the link, you can add the swaps by yourself, with flashing to the 3QF radar corresponding X SW (there is a guide, how to do it).

The login details are written in the sign-in page - it is guest, guest. There is plenty of information, useful tools, SW and so on. There is really a lot of things to see there. You can also get ODIS from there.

Yeah, I know about this files. There is also solution, how to get swaps working on ACC (also pACC), but for my taste it is too complicated and risky Yes, I am there, I know a few people from there and that is why I joined the group 😀

Yes this radar will work, I have the same. It will just need SW upgrade maybe. ABS is not a problem, if you already have ACC and I think, that every Superb's ABS support ACC, because all of them have EPB.

Yes and be sure, that you have correct navigation (infotainment MIB2+, but if I am not mistaken, cars produced after 5/2015 have MIB2). Dataset and SWaP/FeC can be uploaded to the unit via ODIS-E (ODIS-S is not enough) And what radar do you have? If you need to change the radar, you need to get CP removed, the rest can do someone remotely

Front Camera must be 3Q0 or 2Q0 Front Radar 3QF with any index, 5Q0 with index G/H, 2Q0 (I mean HW part number, not SW, because for 3QF the SW is 5Q0 too, there is not specific index needed) Navigation (MIB2 and newer) It could also be needed to write to the front radar special dataset, without it it won't work. I am not 100%, but maybe some radar no need this dataset (in my case on Octavia, it was needed) CP removal is 100% needed in case, that you are going to change the radar (front camera 3Q0 is not protected, no need to do CP removal) After all of this done: Calibration of front radar (in case that it was changed - I did the calibration with only mirror 90 cm in front of the car and run calibration, after third try working without any problems) Coding for sure SWaP/FeC activated in radar (without changing radar - needed only the one for pACC, with changing the radar - needed three SWaP/FeC (Front Assist variant, ACC variant, pACC) In case of 2Q0 camera without TSR activated -> SWaP/FeC also for activating TSR All of this can be done remotely if you have VAS. The dataset needed can be found on the internet for free, swap/fec is not free unfortunately

Yes, depends of a few requirements, which I wrote there, because someone else was also asking about it there, take a look For example I get it working on my Octavia MY2016

pACC is for someone "only" FeC/SWaP, but it could also require special dataset to be written in Front Radar. The requirements for pACC: Front Camera (A5) with active TSR (2Q0 requires SWaP/FeC for that too) Navigation Front Radar 3QF with any index, 5Q0 with index G/H, 2Q0 (I mean HW part number, not SW, because for 3QF the SW is 5Q0 too, there is not specific index needed) In cases for Superb with radar from factory (or retrofited one previously on Superb/Passat) possibly no needs to add special Dataset I don't want to "spam" this topic with pACC related questions, but I can help you with the retrofit, just start new thread and mention me, we can elaborate on that And regarding the heated windscreen, I never used it, I use always auxiliary heater, but I think, that if someone is in hurry and forgot to turn on auxiliary heater, the heated windscreen will be very appreciated at the time

You can set that in adaptations of A5 module. Set value "Lane Keeping Assist On Status" from "active" to "active (settings in menu)". In this way you can set it on/off via menu and it will stay like this. This was working on pre-FL Superb and for Octavia MK3.

Just to add to TJA. It is possible to activate TJA on 99% (I was not able to found not compatible yet) of 3Q0 cameras after proper SW flashing and parametrization.