Looded

So the problem in stalk no engle sensor? my work randomly https://youtube.com/shorts/1o-mFceaEKE?feature=share

i have this kind of problem and i already changed the led module and polished the tube itself from yellow soot. It got better but I'm still not happy. is it possible to find the tube itself for replace it?

Hell some of the shop and on ali available wire set halogen to bixenon 10x14 but all of them for oktavia or polo. it can be installed for skoda bixenon headlights?

Hello somewhere in Europe possible find for sale broken led drl headlights for rapid? I need an small part from it,led tube that is in side headlight.this is something acrylic that lights the turn signal and drl

Thank you but pq25 didn’t have channel, there a difference from hi platform mqb or pq26, or pq26 is same mqb. Anyway there another bcm on my board and i can make adaptation with way you explains

Hello Someone may have done this personally, what are the selection criteria for a particular car model? Which model of hi BCM should be chosen if the goal is only the correct operation of the Bixenon headlights? Rapid 2013 1.4 tci 6R0 937 087 P BCM PQ25 H+4 H34 0411

installed 2 oem montecarlo tail! Now I order oem bulb holder for this tail, see next if that help Thanks

thank you before to be default tail of the 2013 model, no diod on board mirrored, there is nothing to confuse to soldered I opened it, checked it and soldered it again 😂from minus to plus and then again plus to minus and so on, there is no million line to soldered, only one in specific location. The bulbs installed perfect on two board, the one different left from right it have 2 extra connector with 2 bulbs w4w and central connector of all tail have one more wire. There no visible any circuit boards, maybe inside tail or inside diode bulbs

All original exept new part, tail light ,no headlights sorry. 5JH945207 5JH945208 i didn’t change wire or connector and yes no need coding bit one tail not working properly as you see. I soldered the diode to the old board but in the end left working perfect but not right. new holder (back plate) 5JH945231 5JH945232 . i have sedan no spaceback

i have press pedal and it lights up more like it should in the old version. why did the left one change its job and the right one didn't😂 Yesterday i order new back plate for it, one of the friends said just so it would work properly. for accuracy, these are monte carlo headlights on old boards

i have press pedal and it lights up more like it should in the old version. why did the left one change its job and the right one didn't😂 Yesterday i order new back plate for it, one of the friends said just so it would work properly.

Hello any code or may i need to edit some bit for fix Monte CARLO headlights? right working not correctly

Hello One of the headlights works with all the lamps, is it possible to fix this with coding? Rapid 2013 pq 25 ,HELLA Rear Light

Hello, is it possible to find this in Europe or install a caliper from a different model?

I am not but some guys from drive2 yes😂 Drive2

At this headlight fir on 2013 model?

no one, ok i plugged it in but now another problem. The turn signal does not work when the engine is turned on. but it definitely works when i opening and closing the car😂 and also works as an alarm, but I repeat only when the engine is off

Hello where should the wires be connected to headlight if everything is isolated there. i tried to plug the wires into the headlamp connector for the test and it worked in some cases but how i have to connect them outside headlight?

I asking my mechanic and it’s say this one is normal, itself he used Rheinol, and from last inspection he add this one in my rapid. he said they differ only in one component, something related to the environment. Thanks

Does anyone know what coolant this is? on the package there is not enough information about the brand or model that it is used. owner hn3 caxa 1.4 tci Thanks

Hello I got some results by connecting to the pins behind the headlight but it doesn't work correctly when the turn signal is turned on. There is a result that it works on standing and dipped high beams, but the turn turns on as white. And I have no idea where to connect the wires😂

My first experience

What’s setting for torque in this engine? 25nm??? Or depend of spark spec?

Hello , is possible to open close windows automatically on PQ25 rapid platform 2013?