j.hanratty

In the end it will be the dealer I bought it from's problem to sort out. Interesting that they do a pre-programmed unit from a Slovakian company and I wouldn't know how genuine they are but they look ok. If someone was buying one and didn't want the cost of programming. https://www.oemvwshop.com/5q0959760f-control-unit-for-seat-and-backrest-adjustment-p2564749/ Thanks again for your help.

I'm taking it back to the dealer (non Skoda) who sold it to me and they can verify that it's not working. It looks like 5Q0959760F is the latest controller to replace it, and I know it needs programming to my VIN but wondering does it come preprogrammed when bought from a Skoda parts department? I know the garage I bought it from wouldn't be able to programme it but could install and reset it it if preprogrammed. Thanks again for all the help.

Researching this Return to factory setting is a no go as it looks like it disables the seat.

There were three options: Return to factory setting, Norming, Reset Standardization. Should I have done one of the others before Norming? Sorry to keep asking but i don't want to alter anything I can't reverse.

Did the norming process (all axes) and it finished correctly and no change so back to the car dealer and he can try and sort it! Thanks for all your help.

So I should try a full basic settings and go from there. Is that back to factory settings as I see I have three options? Thanks for all your help.

It had a service with Skoda in January 2021and surely they would have applied any software updates then. Skoda had it in for a service on 20/3/2019 also and I see the software update for this problem was released on the 7/2/2019 and surely one of those times they did it. Is there anyway of checking?

Dsg has just been serviced car has 28,000 miles on it with a comprehensive service history. I don't think there's anything really wrong with the gearbox it's a matter of me probably adapting to it's characteristics. I haven't tried sport mode but I will. Thanks.

Thanks, I shall try a full basic setting with a reset of all the movements which I had tried without the basic resetting on VCDS. When you say a full basic setting, what does that entail just the basic settings or do any other settings need to be done?

The tank will work perfectly and I wasn't prepared for another wait for a new one that may well have been just the same. I know it's a semi automatic gearbox but it seems to be set up for getting good mpg above all else, all the usual complaints really. The ride on the 19 inch wheels is harsh at times especially on drain covers potholes etc. Tyre roar isn't a problem. It's a diesel 2.0 150 bhp.

Replaced Mit Silikat Radiator expansion tank with a Mahle pattern part which didn't fit exactly as left side clip that holds it on to frame was slightly short, so I put a self tapping screw through the top of the clip and some rubber underneath to stop it moving up and down and it now fits perfectly! I reset DSG box and it's slightly better but I will probably get a TVS gearbox remap as it's not an easy thing to get used to. I was driving a 27 year old Lexus Ls400 before and the auto box on that was better. Comfort is pretty good but it does have 19 inch wheels which are just a bit too much and I may replace them with 18 inch wheels. I was even thinking about 17 inch wheels but I think everything on the car is set up for the 18/19 inch wheels.

I have just bought a Superb 2016 L&K and did a VCDS scan and I have a problem with my drivers memory seat not working I have fault codes which I shall show below. I have gone into advanced measurements for the memory seat and have tested which buttons are active. The memory control switch has four buttons Set, 1, 2, 3. pressing button Set does nothing pressing button 1 I get active on 2 in the measurement list, pressing 2 occasionally is seen as active in 2 on the measurement list and pressing 3 I get active on 4 in the measurement list. I have taken apart the switch and put it it back together but no change. I am guessing a defective switch? I have tried moving the seat fully forwards , backwards and every other way and that changed nothing. Whatever button I push nothing happens ,tried to save to memory but again nothing. I had these fault codes when I first did a scan after buying the car and I cleared all codes before scanning again. Address 36: Seat Mem. Drvr Labels: None Control Module Part Number: 5Q0 959 760 A HW: 5Q0 959 760 A Component and/or Version: Sitzmemory H06 0009 Software Coding: 001000000000000001A081808080000000008181000000F4 Work Shop Code: WSC 00000 000 00000 ASAM Dataset: EV_SeatMemorDriveSide 001015 (SK48) ROD: EV_SeatMemorDriveSide_001.rod VCID: 3B2320EFC3E56DB23A1-806E 7 Faults Found: 9655636 - Motor for Seat Fore/Aft Adjustment B1355 54 [00001000] - Missing Calibration / Basic Setting Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 1 Reset counter: 172 Mileage: 45192 km Date: 2024.03.31 Time: 01:23:42 9655892 - Motor for Seat Backrest Adjustment B1356 54 [00001000] - Missing Calibration / Basic Setting Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 1 Reset counter: 176 Mileage: 45192 km Date: 2024.03.31 Time: 01:23:42 9655380 - Motor for seat height adjustment B1354 54 [00001001] - Missing Calibration / Basic Setting Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 1 Reset counter: 130 9655124 - Motor for Seat Tilt Adjustment B1353 54 [00001001] - Missing Calibration / Basic Setting Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 1 Reset counter: 130 Date: 2000.00.00 Time: 00:00:00 9654868 - Motor for Lumbar Support Fore/Aft Adjustment B1352 54 [00001001] - Missing Calibration / Basic Setting Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 1 Reset counter: 130 Mileage: 45192 km Date: 2024.03.31 Time: 01:23:42 9654612 - Motor for Lumbar Support Height Adjustment B1351 54 [00001001] - Missing Calibration / Basic Setting Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 1 Reset counter: 130 Mileage: 45192 km Date: 2024.03.31 Time: 01:23:42 10489856 - No Basic Setting B2010 00 [00001001] - - [keine oder falsche Grundeinstellung/Adaption] Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 7 Fault Frequency: 1 Reset counter: 130 Date: 2000.00.00 Time: 00:00:00