GAFF

Very true, although mine is unmodified but is outside of warranty.

Also not keen on wheels but those seats look the business

I know one of the lads had a few rear motors replaced.

This is good and shows the differences with different settings Enjoy! Digital SLR camera

John Mulholland does be on here the odd time, he's quite a big dealer. I know one of the lads in Cork got parts from them and was very pleased with the price and service. Btw I've sent you a PM

I was thinking about getting a VagCom lead as I just got a laptop, but there pricey (for the little use it would get).

Great result

I replied to your PM Bascially I had some clamps I bought in lidl, its actually these ones, Lidl Online I removed the wheel, put on the mudflap and lightly fixtured it. Then I used 4 clamps at different positions along the ridge to get the flap to sit in a tight position. Then I took the hair dryer and heated on the wheel side of the flap along the ridge and moved clamps one at a time to get it tight, I also tightened fixturing screws to find the sweet spot. Then while it was cooling down I pushed the bottom of the flap towards the back of the car to tighten the gap. Tbh I found this method better than the hot water and bucket as it cools too quick to fixture it tight.

I wonder if lessons have been learned and design changed.

Madness, sitting right on the back of bike's with different braking points. The Porsche owner did the right thing.

:rofl:

Ah, that's my little rattle box Good to see its being useful

This is kit that I have, after issues with Sharpness Canon took mine back and found the focus needed adjusting. Does seem better although haven't used it too much since.

Exactly

The brightness of the actual lights or the dash lights ?

I have dipped Xenons and bought Philips Vision Plus from Powerbulbs for Full beams which are very good.

What about pricing your local Skoda dealer for fitting? I didn't realise until afterwards that my dealer would have done it for same price as a fitting centre.

This may help, http://briskoda.net/octavia-ii/creaking-jumbo-box/122018/

Stupid question but whats "neat"?

Also Prussia St has moved its Servicing Dept. to Bluebell. That Mazda showroom is quite bit (didn't realise the brand was that popular).

What ya getting done now?

:confused::confused::confused::confused: Whats so funny about that if you don't know what they are? See here (I couldn't find photos),

IIRC on the left flap I actually tried to file a better groove. But on the right I mounted it, used a couple of clamps to clamp either side of where it attaches to the body along the length of the mudflap (hence why the wheel came off), then heated the inside and did a bit of moulding by hand to hold it in position while it cooled. I wouldn't go too mad with the heat or you might damage the paint on bumper.

Typical dumb a$$es in Eire, they are now bringing in all these and Privatising (just to make sure a company can shaft you even more). At a time when the UK are seeing the disadvantages and phasing out. Muppets. Although I have been told that Gatso vans will no longer be hiding behind bus shelters but easy to spot to encourage speed reductions. I'll believe it when I see it.