Morph

50mm Mike. For the Zenith alloys.

they look like this but obviously thicker steel.

Yeah

Yeah sorry. They were as standard inside the centre caps of the wheels. Think the caps are like 56mm ish.

Hi can anybody tell me what the circular metal clip is called that sits inside the centre caps or better still a part number if there is one.

Hi. Had a problem with my alarm for a while, no siren or chirps when locking and unlocking, the indicator flashes work. Thinking it was the battery in the siren so I changed this, the old battery was showing full charge but the top V200 battery did have a little bit of electrolyte on it. PCB and components look fine to an untrained eye. Reconnect the alarm and everything works, siren, chirps and indicator flashes. Start the engine (possibly turn ignition on) and then the siren stops working but the chirps and indicator flashes still work. Disconnect and reconnect and everything works fine when I trigger the alarm, again I start or turn ignition on and it reverts back to no siren but chirps and flashes still work. Alarm siren is 1K0951605D

Hi. I had this issue or very similar and it turned out to be either the solder on the back of the speedo or a lose harness where it connects into the back of speedo but your issue does sound a little different.