Frenchtone
Members
-
Joined
-
Last visited
Everything posted by Frenchtone
-
^ I ask again which country do you refer to when you talk of vehicle mods etc not being allowed?
-
^ ^ ^ are you talking about the UK or France?
-
Could be your light switch has burnt tracks, if so its a safety feature so you drive at night! I had a similar problem with the switch, opened it up and on the pcb burnt tracks, soldered on some by-pass wires and it now works fine Don't know what caused it but assumetoo much current passing, a short somewhere perhaps!!
-
-
Same with mine, ease out the panel and it should be within, and then easy to remount! Good luck
-
Excellent job!!
-
Ok, this is the towbar on my Williams trailer, bought second hand so I don't know if they are all supplied with this or if its just with load bearing tyres version(smaller diam fat jobs) I also have a car transporter trailer , classic Brain James so built years ago and with that because of the relative heights of the hitch and the ball I have had to raise the hitch by using 2 x 2" square pieces of robust steel box section, at that height it all works well!
-
westfallia fixed on a pre fl 4x4 475mm to top of ball ie the flat bit if round, probably 480mm. This is unladen!(for the pseudo Welshman - :-)) } I tow a Williams P6e trailer which has a swan neck type tow bar, all runs level and have not had any probs!! I run on Dunlop SP01's 225x55x17, as originally supplied.
-
Are we getting a bit off topic here/ ;-D)))
-
Ok, out an about over the weekend, no probs encountered but, I am in Finisterre in France, I had V9 loaded previously which was also fine here but when V10 rolled out I was advised that it did not work smoothly in the Uk kept rebooting etc but, it was fine in other parts of western Europe --- I decided to not risk possible problems. I suppose now its a case of yer pays yer money and yer takes the risk(or not)
-
ok, refitted without probs!! ;-))
-
The offside mirror glass came loose today, got it off before it was lost. However when I got home and removed the back pad a clip of some sort was dislodge, see photo, anyone know where it fits on rear of mirror pad, hsd a good look but cannot detect anywhere obvious! -- the piece is approx. 30mm in length. thanks in advance
-
think it all needs to come off!
-
The sd arrived yesterday , installed this morning , seems to work glitch free, but have a longer trip scheduled for later in the week so who knows? Card bought on E... from a Merseysider, cost £25 inc delivery to France, however the card and packet originated in Lithuania
-
Are there vnot 2 buttons, one either side of the speedo? Long pressing one on mine puts up the hours and mins and the other changes 'em , think its left button first!
-
ok, i'll do a search!! Thanks!!, and enjoy your jollies
-
blackb1rd where did you get your card?
-
I hope you took the knee whilst typing that ^ ;-))
