i own an 03 reg fabia vrs,extras include a pd 160,green cotton panel air filter,magex back box. What is the vrs like to drive after the jabba remap,how does it handle, any extra mpg,what figures bhp do u get!!

i own an 03 reg fabia vrs,extras include a pd 160,green cotton panel air filter,magex back box. What is the vrs like to drive after the jabba remap,how does it handle, any extra mpg,what figures bhp do u get!!

A kitten just died!

Use the search man, this has been covered to death

check out our current offers on re-maps

absoloutly amazin, but if i was you i would lower the car and fit the ARB first sort the handeling out, then remap it, but make sure you have pennys for a new clucth

Aye, anti roll bar and 312mm before remap imo

i own an 03 reg fabia vrs,extras include a pd 160,green cotton panel air filter,magex back box. What is the vrs like to drive after the jabba remap,how does it handle, any extra mpg,what figures bhp do u get!!

Hi!

Have you uprated your clutch?

Our stage 1 makes approx 170bhp and 295lbs/ft torque.

With an uprated clutch, we can get you running at 185bhp and 315 - 325lbs/ft

Aye, anti roll bar and 312mm before remap imo

Agree. Infact I'n not bothered about a remap now. Rather put the money towards some KW v3's.

The clutches are fine if map'd correctly, problems start when you get too much torque low down in the rev range and you have far too much boost for the stock KKK KP39.

jabba map is awesome,i'm running 173bhp and 346ft lbs of torque,dyno proven on awesomes rollers,car pulls amazing from 1600rpm all the way to 5000,Michael is a proper mapping genius,he won't let you go untill you are 100% happy,every mod that i can't do on my fabia is done by jabba,i cannot recomend them enough,i even drive a 400 mile round trip,it is all well worth it as the service and backup on everything they do is 1st rate,my fabia is very highly modded and under jabba's guidence has been 100% reliable,even with the abuse it gets on numerouse track days,they know thier stuff:thumbup:

jabba map is awesome,i'm running 173bhp and 346ft lbs of torque,dyno proven on awesomes rollers,car pulls amazing from 1600rpm all the way to 5000,Michael is a proper mapping genius,he won't let you go untill you are 100% happy,every mod that i can't do on my fabia is done by jabba,i cannot recomend them enough,i even drive a 400 mile round trip,it is all well worth it as the service and backup on everything they do is 1st rate,my fabia is very highly modded and under jabba's guidence has been 100% reliable,even with the abuse it gets on numerouse track days,they know thier stuff:thumbup:

I'll second that:thumbup:

third

I've been a passenger in a Jabba'd PD130 and it was immensely impressive.

how much is one of these "uprated clutches"? and how much would a new standard clutch set you back!?

how much is one of these "uprated clutches"? and how much would a new standard clutch set you back!?

Approx £650.00 fitted.

As the guys above mention, 340+lbs/ft is possible with an uprated clutch, but only 300lbs/ft on stock clutch

p-torque I was wondering, I have a decat and cat back exhaust, pd160 intake can you tailor the map around this? Fabia VRS.

p-torque I was wondering, I have a decat and cat back exhaust, pd160 intake can you tailor the map around this? Fabia VRS.

Yes, no problem.

£325.00 all in, with before and after Dyno print outs

This is for a full custom map, and will take at least 1/2 day

£325.00 all in

My god thats good!!

Where are you based... please be in chippenham, i just didnt realise!

Yes, no problem.

£325.00 all in, with before and after Dyno print outs

This is for a full custom map, and will take at least 1/2 day

What sort of figures with full stainless etc.. How about a clutch and custom map price?

My god thats good!!

Where are you based... please be in chippenham, i just didnt realise!

Hi!

We are in Wombourne Wolverhampton

If you do a search for P-Torque on this forum and seatcupra.net you can read some reviews.

2 customers with 130PD's made 186bhp and 295lbs/ft torque from our stage 1 software (on 2 different Dynos...not ours) . These are only peak though....whats even more important is the way the we map to ensure a nice flat torque curve without heavy tail offs.

What sort of figures with full stainless etc.. How about a clutch and custom map price?

Hi!

What model is this for please?

Hi!

What model is this for please?

Sorry its a Fabia VRS

Uprated Sachs Performance clutch, and custom mapping we can do for £950.00 all in - fitted