The emissions warning light is now on my fabia after the hesatation

fixhad been carried out , drives fine . Any ideas

EGR flow has been reduced too much. If you fitted the 9mm gasket it needs drilled out to 11mm.

EGR flow has been reduced too much. If you fitted the 9mm gasket it needs drilled out to 11mm.

I thought that fitting the gasket was for it to stay at 9mm to fix the hesitation ?

I thought that fitting the gasket was for it to stay at 9mm to fix the hesitation ?

Original gasket was 23mm, BLT engine fix was to fit a 14mm gasket, but it didn't cure the stutter completely. Dealer cannot fit a 9mm gasket, as the emissions don't meet the criteria. 9mm gasket and turning down EGR with VAGCOM, is one fix, or 11mm gasket with no tweeking needed.

Modern cars eh

where can i get the 9mm gasket from?

pt no. 028 131 547b

tried ordering from skoda and they said it was manufacture protected i.e maybe a vw or audi part?

thanks