just want to no what sort of boost people are running and what mods there have done as i like my boost lol used to run 34 psi in my old saff cossie . Now i run about 10 in the vrs

Limp mode = 5psi

Standard map = 10psi

APR Stage 1 = 17psi

Shark Performance Stage 1 = 19psi

Only engine performance mods are a K&N panel filter, Forge DV (green spring) and G60 Flywheel.

1 bar peak on low boost, makes 255bhp (I have a manual boost controller)

1.7 Bar peak on full, makes 325bhp

19psi peak Forge ipro (O.CT) Stage 1

19 psi on shark performance map

19 psi is ok what sort of power you shark lot getting if you dont mind me asking ?

19 psi is ok what sort of power you shark lot getting if you dont mind me asking ?

Errmm...... enough!?

Never had the car on rollers mate so no idea I'm afraid. Most Stage 1 maps make about 205-210bhp on a standard car I think.

I'll see if I can get onto Janspeed's rollers between Christmas and the New Year, as I've been on them before with another car. I always seem to miss out on the club RR days!

Here's a review I did on the Shark map: http://briskoda.net/forums/topic/178029-review-stage-1-map-on-a-18t-auq/

I also have a shark stage 2 map and mine is running at 1.5bar which is about 22 psi. I've had this running for a year now with no problems

see i would like 1.5 bar lol got to be about 230 brake ?

1.5 bar thats high pressure for the little k03 turbo!!!!!!!

im guessing it drops right back to 1 bar quickly ??? i hope for the turbo's sake lol

1.5 bar thats high pressure for the little k03 turbo!!!!!!!

im guessing it drops right back to 1 bar quickly ??? i hope for the turbo's sake lol

My K03s peaks at a little over 1.5 bar and has done so for about 4 years......no probs to date.

However, I always use Mobil 1 0W40 SHC and change it annualy at 1.5K which might help the turbo.

Plus the other mods I've done help to elliminate compressor surge, which as we all know if left unchecked fecks overboosted/overspeeded turbo's.

Bill.

Oh oh oh a saph cossie!

I will own one someday!

I'm running standard boost for the moment, thinking about a shark stage 1 tho.

Im getting a stage 1 revo tomorrow, what boost would that run?

Can you still adjust the boost up a bit to make more power?

Joe

I'm running standard boost for the moment, thinking about a shark stage 1 tho.

Do it!!!!

You won't be disappointed

my mates gti golf runs 1.5bar on his ko3s thats lasted ok

and yea have had 2 money pits i mean saff cosworths 280 bhp stg 1 and a 396 bhp 34 psi diff killing animal lol

my mates gti golf runs 1.5bar on his ko3s thats lasted ok

and yea have had 2 money pits i mean saff cosworths 280 bhp stg 1 and a 396 bhp 34 psi diff killing animal lol

Holy cow, 34psi thats mental, the turbo must have been about the same size as my head

Edited 16 December, 201015 yr by banzaiman

only a 34-63 34psi then 28psi at 7200

ah you gotta love a big boost cossie

i ran my 2wd saph at 34psi producing 431bhp and then my escos used to run the same boost but 452bhp.

not sure what the ocy runs.

yea just did not like the big bills that come with it lol

Oh oh oh a saph cossie!

I will own one someday!

I'm running standard boost for the moment, thinking about a shark stage 1 tho.

Dude, get the Shark map TODAY!!! There's a special offer on them with £100 off!

Oh, and you Dan!! Crack on!

Edited 16 December, 201015 yr by Bodge

i was going to say get the shark rather than the revo sorry to the revo lot i dont like the maps :(