As a few may know I am breakin a black vRS mainly coz I needed parts to fix mine up. Gearbox mainly but seen as this one had a few extra goodies and newer stuff than mine I thought I'd have it.. Its taking me ages. I have never done it before and I am loving it but its hard work. I've done most of the inside, and the engine is finally out and I've got the box off. Didn't use a crain in end, I made a board up with big runners on and just lowered the shell down till the engine was on it then lifted the shell up again onto stands.

As I was trying to remove the drive shafts the board split lol, luckily the engine kept it together long enough to support it on 2 jacks and brake disks to stop it falling while I fixed and seriously strengthened the board.

Not gettin the box away was easyish but I want the sache clutch too and I don't have a tool to get it off. Its about a size 9 but its not a normal spanner? What is it and where do I get a tool for it?

I've never seen a bolt like it before.

Cheers

Billy

What tool is this?

As far as I remember you just use a normal bi-hex socket/ring-spanner. I think the heads are like 8 or 10mm or something.

I have a set of these bolts at home, so I can confirm later.

Obviously a single-hex socket/ring-spanner won't go over, so go dig out you bi-hex stuff and give it a whirl.

That looks like the same G60 fly and VR6 clutch setup that I have. You going to put the G60 fly on your car too then?

use a ring spanner if you dont have a socket to fit, some are 9mm some 10mm

As far as I remember you just use a normal bi-hex socket/ring-spanner. I think the heads are like 8 or 10mm or something.

I have a set of these bolts at home, so I can confirm later.

Obviously a single-hex socket/ring-spanner won't go over, so go dig out you bi-hex stuff and give it a whirl.

That looks like the same G60 fly and VR6 clutch setup that I have. You going to put the G60 fly on your car too then?

cheers mate, i ended up borrowing a kit from the garage lol.

it is a G60 fly and sache clutch, its a tad worn but yea I am puttin it on mine it feels so much better than std,

cant wait to see what its like with the extra power mine has over the last on, you could feel the diff in power today on way to the garage.

plus oue for everyone on 18" rims, go back to 17" lol, better ride, grip, handling

billy