Hi all,

Got some smoked side repeaters coming from Billy2981 in the next couple of days.

Do the existing ones just prise (gently) out?

Cheers

Martin

I think they twist, anti-clockwise, but not 100% sure. I know you can see them if you remove the wheelarch liners.

Hi all,

Got some smoked side repeaters coming from Billy2981 in the next couple of days.

Do the existing ones just prise (gently) out?

Cheers

Martin

You need to release the bottom of the wheel arch liner so you get your arm/hand up behind the lamp. It has two clips moulded in. Push or pull the lamp one way - towards the front or rear of the car - to squash one of the clips and while holding it in this position, push the opposite end outwards.

Going to need to do this soon. Need to clean out the build up of polish.

They should be with you by Sat mate. Had a long one the other day, I going to bed now for a few hr so I can get them in first post thismorning.

Cheers billy

Can you confirm how they are removed please?

Thanks

Martin

I had to go inside the wing as the clip is quite strong and they sit in a small resess so you cant push them back and out like most.

Just need to jack car and take wheel off then undo some of the HEX screws to get your hand in. you could clear out the gunk at the same time lol.