Alloy wheels

[H11nta]

HI all i have been offered some 255/30/19 rs 6 wheels will these fit a 2007 octy VRS thanks

[lard-ajc]

HI all i have been offered some 255/30/19 rs 6 wheels will these fit a 2007 octy VRS thanks

offset, PCD, number of bolts and width would all help us answer the question...

[H11nta]

offset, PCD, number of bolts and width would all help us answer the question...

sorry not sure they are on ebay http://www.ebay.co.uk/itm/170760990864?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[lard-ajc]

unless anyone on here happens to know the dimensions of the wheels you'd have to do some more research to find the measurements and come back with them...

[H11nta]

i will go and get one latter and try it on the car. has any one run 255 tyres on an octy mrk2?Just found offset is ET32

Edited 12 January, 2012 by H11nta

[rob_e]

they'll bolt on the hub without any problem, but they'll be way too wide and that offset is very low. IIRC the RS6 has 9" wide rims, with that offset you'd be almost 40mm extra poke. Also that tyre size is too big (as in WIDE - high chance of rubbing) plus your rolling radius will be a lot bigger, meaning speedo etc is wrong.

[H11nta]

they'll bolt on the hub without any problem, but they'll be way too wide and that offset is very low. IIRC the RS6 has 9" wide rims, with that offset you'd be almost 40mm extra poke. Also that tyre size is too big (as in WIDE - high chance of rubbing) plus your rolling radius will be a lot bigger, meaning speedo etc is wrong.

not to worried about the speedo. Are there any spacres i could get i realy want change the standard 17" wheels.

[thejames]

Spacers can't help you! A wide-arch kit might.

If that 40mm figure is correct, I think you're out of luck.

[rob_e]

not to worried about the speedo. Are there any spacres i could get i realy want change the standard 17" wheels.

Spacers will make it even worse!

:p

The OE sizes for 18"s on the vRS are 7.5" wide with et51.

[H11nta]

Spacers will make it even worse!

:p

The OE sizes for 18"s on the vRS are 7.5" wide with et51.

Just been told the are 19x8 5x112mm 255/35/19 not sure what et is

Edited 12 January, 2012 by H11nta

[Anddenton]

I think they will fit! (As long as you trim the wheel arches back and fit a wide body kit like the old Suzi Vitara's) lol