Without guessing and ordering loads of different bolts..

I'm after a tow strap for the front of the octy (purely a styling choice)

Anyone got any ideas on the thread size required to screw in to the tow eye as I need a bolt to screw into the chassis through the TRS Tow strap.

Many thanks!

The vRS doesn't have a screw-in towing eye on the front (or rear).

You just pull out the grille infront of the intercooler, and the towing eye is there.

Unless you've found some other large threaded hole in the front.....

It will be left hand thread maybe too

The vRS doesn't have a screw-in towing eye on the front (or rear).

You just pull out the grille infront of the intercooler, and the towing eye is there.

Unless you've found some other large threaded hole in the front.....

Ah right got you..

I was just comparing it to what I've seen on the Fabia, sounds different

Just trying to think of how I can get around that now then. I've seen other users with them fitted.

Just get a regular strap not one with an eyelet on it, one you thread through itself around the loop.

And you'll either need to cut a hole in the grill or remove it lol