Looks stunning as it always does and as has been said,a lot of dedication to keep it so clean in the weather conditions you have over there,last time mine got washed was September lol

Thanks alot guys! had a detailing weekend, and used about 25hours on wash, clay, mashinepolish and wax The result speeks for it self This makes it much easyer to keep it clean the rest of the winter

What does your friend think of the H&R springs? Any more pics of his car and maybe now with the H&R coils on?

Hi,

I love the low-look you have.. Nice ride...

Are you driving FK Silverline?

For how many km did you drive it? And for how long?

The reason i ask is becous some guys here in Denmark have had problems with leaking dampers ón the FK Silverline..

//Daniel

Sent from my iPad using Tapatalk HD

DaveyBoyWonder: I guess he thinks the springs are OK, but not low enough He is waiting with swap to coils to closer to the spring

Aarosin: Thanks I like the low look, it makes the car look so small I have FK Highsport. I have drived about 25.000km and about 2,5 years

Yes, I read some about leaking dampers on FK coilovers, but also that it "should" have been fixed.. I have not had any problems with mine yet

DaveyBoyWonder: I guess he thinks the springs are OK, but not low enough He is waiting with swap to coils to closer to the spring

Aarosin: Thanks I like the low look, it makes the car look so small I have FK Highsport. I have drived about 25.000km and about 2,5 years

Yes, I read some about leaking dampers on FK coilovers, but also that it "should" have been fixed.. I have not had any problems with mine yet

Cool, thanks...

Hows the comfort? Do you drive it at rock buttom without the helpers in the front?

//Aarosin

Sent from my iPad using Tapatalk HD

I think the comfort is very good, i drive it quite low and dont have any problem with it beeing harse. Driving at normal roads I dont feel it as stiff as a car lowered that much use to feel, and many of my friends have said the same, that they are surprised that it feels so good for the hight But you really feels the ground on bad roads an low speed (1.gear).

No, Im not rock buttom, the driveshaft are rubbing too much to do that. In the summer I have about 1cm threads left without helpers (in front)

I think the comfort is very good, i drive it quite low and dont have any problem with it beeing harse. Driving at normal roads I dont feel it as stiff as a car lowered that much use to feel, and many of my friends have said the same, that they are surprised that it feels so good for the hight But you really feels the ground on bad roads an low speed (1.gear).

No, Im not rock buttom, the driveshaft are rubbing too much to do that. In the summer I have about 1cm threads left without helpers (in front)

Thanks for your 'review'

Its Nice to hear you like it, i can buy it here in Denmark for just under 4000 DKKR :-)

Sent from my iPad using Tapatalk HD

Yeah, the Highsports are a good bang for the bucks

Today the last christmaspresant was picked up, and that was for the car

Think this will lift the interior to more vRS feeling, since the steering wheel is the only thing "booring"

Nice with the GTI wheel.

But what about the airbag?

Mounted new logo on the rear lid. Not 100% happy about the fitment, så might try some more custom fitment on it

Saw an Octavia II Combi the other day with the logo removed and the indent filled.

Made the rear end of the car look much wider... Very cool look. Didn't get any pictures though...

The airbag is on the way, think it will be installed mid January Will mount custom centerbadge, and GTI will be swapped with vRS

Yeah, I think that would have been nice with clean both.. But the both lid is new, painted and installed one mounth ago. Sadly the shop didnt tell me anything before they painted it.. But I will take the logo of, and bend it so it follows the lid better

Did some mods today Fixed the steeringwheel logo

And i got theese the other day

Picked up some warning cancellers, they bolt right in the cars sticker, and switch to 3-pole sticker house in the other end

Wired up to test, but it still gives warning even with the cancellers

And the result, better colormatch than xenon and more OEM look.. since it is OEM

And OEM parts means that its leagal, that xenon not are

Will try to code the warning of tomorrow

Edited 11 January, 201313 yr by Stamsaas

Could it work with these? http://sklep.motohid.pl/pl/p/Adapter-Kasownik-do-LED-DRL-Octavia-2-FL%2C-Superb/339?currency=EUR

They might work, but I am swapping the BMC modul to a 30byte highend, and hopefully I can code it out on that

I spend my entire morning reading through all the pages .. & all I can say is RESPECT ..

Wish we had better roads :-(

Thank you very much, fun to read that you have been through all pages! and thanks

And...

Car is still looking lovely and like the new steering wheel

And lol at that willy wonka pic its great haha,People have said it to me so many times and must think that where I live that there is nothing but smooth Tarmac lol

^ Best condescending Wonka ever.

In fairness pz1811 IS from India, so may have a legit excuse on the road front. In general though, yes, just man up and lower it or bag it if you're comfortable with your sexuality.

Thanks, looking forward to install the new steeringwheel The airbag is on the way now, a litle late.. I am leaving to Thailand for two weeks now, so it have to wait til I come home again

I put in the new 30byte BCM, but still cant code out the bulb error, so think I will try the connectors that Dumlir linkes to

Have some toughts about this years look allso, and new color on the rims are a part of that

God trip mate! looking forward to the "New year" changes

Edited 31 January, 201313 yr by remyhapoldoy

And i got theese the other day

I also installed these on my FL-vRS! They are a perfect match for the DRLs

how did you try to code out the warning for the bulb-out error?

I tried to code of the autocheck for foglight, but it doesnt help any.. Not so surprised, think I read once that only way to code out the autocheck is to code out all or nothing.. Got some other functions with the new BCM though, like brakelight in foglight, and corneringlights

I might buy resistors to put inline with the LED lights. I don't want to code out the entire car.

corner lights are good

This cas is gorgeous! I have one question: oem wheels are 5x120, spacer, or how to hold the wheel to hub? I am from Czech Republic and I want wheels too, please. Thank you for your answer