Guys,

Followed the guide on here and when looking at the passenger side door handle outer little black caps, i cannot for the life of me see the torx nut in the top hole when i take the cap off, i can see the torx nut in the bottom hole.

Also the rear door handles dont even have two caps?

Can anyone help point me in the right direction?

Cheers

Edited 16 October, 201213 yr by ajs_vrs

Are you talking about the one behind the speaker?

Sorry mate no exterior door handles just swapping them for octavia ones.

Cheers

For reference - http://www.briskoda.net/forums/topic/113882-removing-a-door-handle-fabia-and-octavia/page__hl__+door%20+handle#entry1428639

erm, guide shows the front driver door. Maybe the passenger don't have two because it doesn't have a key lock? I'll go check mine out in a bit and let you know.

Thats what i thought but just want to check, the guide needs updated as do i just unscrew the bottom one slightly on the passenger front?

Figured it out, but now to find a long enough took anyone any ideas?

torx? or were you trying test my grammar? :p

torx: http://www.aldi.co.uk/uk/html/offers/special_buys3_27086.htm

Or Screwfix for £23 if you cant wait

Make sure it's a magnetic torx screw set as the screw will drop in the door if you are not careful!! (As i can testify!!!)

I never wound mine out far enough for the screw to come out. If I felt like it was getting loose I would screw it back in half a turn

Just make sure that Bowden cable goes back in the right place!