Bluetooth Fitted - minor VCDS coding query

[IMT]

It took me 3 hours (some bits were extremely easy whilst others had me baffled for a while) but at last I have Bluetooth installed, all works fine - Maxidot showed the phone options even without any coding can make/receive calls/phonebook displays (all with an iPhone I hasten to add).

Initially I had a plethora of fault codes but after clearing these and having a run out all left bar 2 (suspect it was having the battery disconnected).

One was that the CAN Gateway had not been correctly coded - sorted by adding Module 77 to the installed list, the other that I can't get to go away is the below:

Address 77: Telephone (J412) Labels: 7P6-035-730.clb

Part No SW: 7P6 035 730 J HW: 7P6 035 730 J

Component: TELEFON H15 3200

Revision: 1B001001 Serial number: 00007663009948

Coding: 0A01000000010101

Shop #: WSC 00028 028 00022

ASAM Dataset: EV_UHVNA 002720

ROD: EV_UHVNA_SK35.rod

VCID: 397991B8B88BA3D026B

1 Fault Found:

9458195 - Control Module for Cellular Telephone

B1052 13 [009] - Open Circuit

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 4

Fault Frequency: 1

Reset counter: 11

Mileage: 277 km

Date: 2000.14.26

Time: 14:50:04

Any ideas?

PS my CAN Gateway now seems to make a bit of a noise when being accessed, I doubt this is normal but is it or do I need to see what seems to have disturbed it?

[Eddie-NL]

Don't worry about the gateway, i'm sure it is ok

Change the coding on the bluetooth

0A01000000010110

try that to see if it clears the fault

[IMT]

Don't worry about the gateway, i'm sure it is ok

Change the coding on the bluetooth

0A01000000010110

try that to see if it clears the fault

Superstar, seems to have cleared it. One IMT beer token is yours!

[pmdc199]

Don't worry about the gateway, i'm sure it is ok

Change the coding on the bluetooth

0A01000000010110

try that to see if it clears the fault

 

Eddie you seem to be the vcds god. I am a numpty. I have a new vcds  and it was perfect. Just fitted bluetooth and now the port seems not to communicate with anything all modules are red I also got it to work once and  it  I had 77 on my list in vcs how do I get to the can etc to program it.

 

Is there a reference for how to code retro bluetooth anywhere please.

 

Sorry for being such a dumb *****

[pmdc199]

It took me 3 hours (some bits were extremely easy whilst others had me baffled for a while) but at last I have Bluetooth installed, all works fine - Maxidot showed the phone options even without any coding can make/receive calls/phonebook displays (all with an iPhone I hasten to add).

Initially I had a plethora of fault codes but after clearing these and having a run out all left bar 2 (suspect it was having the battery disconnected).

One was that the CAN Gateway had not been correctly coded - sorted by adding Module 77 to the installed list, the other that I can't get to go away is the below:

Address 77: Telephone (J412) Labels: 7P6-035-730.clb

Part No SW: 7P6 035 730 J HW: 7P6 035 730 J

Component: TELEFON H15 3200

Revision: 1B001001 Serial number: 00007663009948

Coding: 0A01000000010101

Shop #: WSC 00028 028 00022

ASAM Dataset: EV_UHVNA 002720

ROD: EV_UHVNA_SK35.rod

VCID: 397991B8B88BA3D026B

1 Fault Found:

9458195 - Control Module for Cellular Telephone

B1052 13 [009] - Open Circuit

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 4

Fault Frequency: 1

Reset counter: 11

Mileage: 277 km

Date: 2000.14.26

Time: 14:50:04

Any ideas?

PS my CAN Gateway now seems to make a bit of a noise when being accessed, I doubt this is normal but is it or do I need to see what seems to have disturbed it?

 

How did you fit the adaptor behind the bolero mine won't go back in?

[pmdc199]

Got it working to scan error codes below if you can help then would be so happy please

 

19 - Can gateway

77 Telephone

 

 

-------------------------------------------------------------------------------

Address 77: Telephone (J412)       Labels: 3C8-035-730-A.clb

   Part No SW: 3C8 035 730 C    HW: 3C8 035 730 C

   Component: Telefon       012 0822 

   Revision: --------    Serial number: 35909603527251

   Coding: 020004000100111100000000

   Shop #: WSC 00000 000 00000

   ASAM Dataset: EV_UHVPremi A02705

   ROD: EV_UHVPremi_SK35.rod

   VCID: 234E9A832AEB45001D9

 

3 Faults Found:

9457171 - Positive output audio channel for speech/telephone

          B104E 13 [008] - Open Circuit

          Intermittent - Confirmed - Tested Since Memory Clear

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 4

                    Fault Frequency: 1

                    Reset counter: 203

                    Mileage: 51610 km

                    Date: 2038.14.11

                    Time: 14:50:04

 

9458451 - Cellular Antenna

          B1053 13 [009] - Open Circuit

          Confirmed - Tested Since Memory Clear

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 4

                    Fault Frequency: 1

                    Reset counter: 162

                    Mileage: 51610 km

                    Date: 2038.14.11

                    Time: 14:12:28

 

13636352 - Control Module Not Coded

          U1013 00 [009] - -

          Confirmed - Tested Since Memory Clear

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 4

                    Fault Frequency: 1

                    Reset counter: 162

                    Mileage: 51610 km

                    Date: 2038.14.11

                    Time: 14:12:28

 

 

-------------------------------------------------------------------------------

Address 19: CAN Gateway        Labels: 1K0-907-530-V4.clb

   Part No SW: 1K0 907 530 AD    HW: 1K0 907 951

   Component: J533  Gateway   H16 0233 

   Revision:   H16       Serial number: 4520K10407081D

   Coding: E9A07F06000202002303

   Shop #: WSC 73430 790 00999

   VCID: 69D2C8AB40475F50975

 

3 Faults Found:

01044 - Control Module Incorrectly Coded

            000 -  -

             Freeze Frame:

                    Fault Status: 01100000

                    Fault Priority: 1

                    Fault Frequency: 1

                    Reset counter: 162

                    Mileage: 51610 km

                    Time Indication: 0

 

01305 - Databus for Infotainment

            004 - No Signal/Communication - Intermittent

             Freeze Frame:

                    Fault Status: 00100100

                    Fault Priority: 1

                    Fault Frequency: 7

                    Reset counter: 203

                    Mileage: 51610 km

                    Time Indication: 0

 

01304 - Radio

            004 - No Signal/Communication - Intermittent

             Freeze Frame:

                    Fault Status: 00100100

                    Fault Priority: 2

                    Fault Frequency: 1

                    Reset counter: 203

                    Mileage: 51610 km

                    Time Indication: 0

[pmdc199]

Does anyone with this get song names in the bolero? I have all working but no song names from my iphone.

Cannot get the adapter to fit in the head unit area and close so will have to cut and put push connectors on.

[IMT]

The adaptor has to go to the left of the venting.

I had song titles from my iPhone on my unit. But since then with android. Nexus 4 and s4 I just get BT audio on screen.

[pmdc199]

I have cut cables as fed up with trying to get it to fit. Also lots of the wires are not needed.