Pd160 turbo anyone fitted or know?

[Big deano]

Is it possible ?

Anyone done

And gains please

[devonutopia]

To my knowledge PD160 and PD150 turbos are the same unit. Its a more reliable turbo than stock PD130, but gains are not that significant. You get a reliable 190bhp, maybe approaching 200 with other mods to complement it.

[Big deano]

There's a scrap yard local I went in for the winders for my seats and stumbled across it and for £250 could be a steal but if there the same turbo what gives it the extra 10bhp over the pd150?

[wilsy7]

Engine mapping. I believe they are the same with a small difference, can't remember what it was tho. Was on here I seem it

[trebormint]

Apparently PD150 and PD160 turbos are exactly the same (and majesty78 knows his stuff)

http://www.seatcupra...ad.php?t=219046 -post 6

[faboka vrs]

Pd150 runs 1.5bar. Pd160 runs 1.55bar.

[devonutopia]

Pd150 runs 1.5bar. Pd160 runs 1.55bar.

This - same unit but they push the tuning a little further for the "Cupra" thing.

[Chris Coates]

I was gonna say - they're both GT1749VB's so they must be identical.

[andypandypoos]

.

Edited 23 November, 2012 by andypandypoos

[andypandypoos]

Apparently PD150 and PD160 turbos are exactly the same (and majesty78 knows his stuff)

http://www.seatcupra...ad.php?t=219046 -post 6

or they're different: http://forums.tdiclu...537&postcount=4

I was gonna say - they're both GT1749VB's so they must be identical.

they different part numbers though? GT1749VB is like Golf or Octavia

[gac]

This - same unit but they push the tuning a little further for the "Cupra" thing.

Most PD150s are also Cupras. If anything, the Leon should have more power, it's bigger!

[lostsoul82]

Sorry to bump a dormant thread, but I've searched and this is the closest to what Im looking for!

I've managed to get hold of a low milage Ibiza Cupra turbo(checked part no etc, def the real deal), to replace my BV39.

My only question is will the EGR line up, as I want to keep it connected for now. Just didnt want to get it all apart and then find I needed a blanking kit!(money is a bit tight).

Am I to understand the BPX Ibiza engine was all pneumatic and the BUK is electric actuator etc? In that case this turbo is off a BPX....

[Guest BigJase88]

Im sure that the 150 and 160 turbo's differ

I have a 150 arl leon running 1.6 bar

[lostsoul82]

From what I've been told, only where the connection for the intercooler pipework comes off(bottom for PD160, back for PD150?) iirc.

[Guest BigJase88]

Yes thats what i thought

[VRSFERGO]

I'm running pd150 with all supporting mods and map at 27psi and she pulls 200hp with 365ft/ib ????

[Guest BigJase88]

Very much on the limits there

[VRSFERGO]

It's been running this now 4 months with no problems

[Mk4 cupra]

I don't know if there the same turbo but the limits of my Cupra pd160 are more than what some are saying the pd160 Ibiza turbo is good to about 215 bhp and maxed out at 220 bhp Meny people are running this power level on there Cupra ibiza pd160s

[Guest BigJase88]

No it isn't /\

They will be using a hybrid version. Or have some terrrible rollers!

200bhp is the limit of the 150/160 turbo's in standard form.

I made 186bhp on mine. Nice and safe

[Mk4 cupra]

Well that's funny then becasue my pd 160 Ibiza has ran 195bhp on amds rollers 206bhp on rollers at Ricky concept and 198bhp rebel power pipes

[Guest BigJase88]

Yes which is what i said 200bhp. 2 rollers have put it below 200bhp so im pretty bang on?

[Guest BigJase88]

You average over 3 rolling roads is 199.6bhp??

[lostsoul82]

Which according to Garrett themselves is the absolute upper reliable limit iirc?

Meanwhile I'm very gingerly continuing to run about 175-180 on a KKK BV39! :S

[Guest BigJase88]

Seen one of them go boom in real life!

Was fantastic!

Could hardly see was like a bomb going off