Just googled the part number for the 90º bend, and found this on seatcupra forum.

http://www.seatcupra.net/forums/showthread.php?t=318413

So for £48 that has to be cheaper than making your own?

So that should replace pipe '2'

Been under mine yesterday Alex and im deffinatly going to have to get one of them got a massive leak on that 90 bend :( good find mate

Been under mine yesterday Alex and im deffinatly going to have to get one of them got a massive leak on that 90 bend :( good find mate

Cheers, think mine is a bit leaky too as it is a bit oily.

I had a look on sfs's website and it only seems to sell the bend as part of a kit so I think you would have to email them to get just the 90 bend.

I will give them an email see how much it will be and see what they say, and mine was absolutely covered in oil I've gave it a clean and done the cable tie mod on it for now but deffinatly needs sorting

I will give them an email see how much it will be and see what they say, and mine was absolutely covered in oil I've gave it a clean and done the cable tie mod on it for now but deffinatly needs sorting

Let me know what they say!

Will do mate all your parts come for that boost pipe yet?

Will do mate all your parts come for that boost pipe yet?

Had to send back the coupler as I got the wrong one (as I have an egr delete) still waiting on them to send out the other one.

Or **** yeah haha forgot, I'll give them an email on Monday let you know what their reply is

@alex fabia

what size coupler do you need if u have an egr delete, is it 57mm

@alex fabia

what size coupler do you need if u have an egr delete, is it 57mm

You don't need a coupler, I just got a reducing 90º bend 51-57mm.

anyone else having trouble after fitting theirs ?, got mine fitted on Saturday, using good quality jubilee clips, (nipped up as tight as poss) and have managed to blow it off twice already, once from the intercooler and once from where the 90' pipe meets the stainless,

cheers

Mine hasn't come off once yet mate try putting 2 jubilees on as I did in the picture can only help

Or use mikalor clips

I need a new boost pipe , would want a after market one but whatever's better on price will do :(

I think it would be important to have a ribbed end on the metal pipe to prevent the silicone slipping off. failing this use a glue or sealant?

Finally done!

I think it would be important to have a ribbed end on the metal pipe to prevent the silicone slipping off. failing this use a glue or sealant?

Believe it or not hairspray is the best thing for holding boost pipe on and doubling up the jubilee clips as previously stated! Was good to meet you last night by the way mate.

I'm looking at ordering the top boost pipework as described (thanks CarlVrs) and the other bottom boost pipe which now leaves the pipe from the turbo. Anyone know anywhere that supply these as I imagine the silicone would have to be high temp?

Fitted mine last week. Haven't had anymore problems popping hoses. I put some blobs of mig welds round the end of the stainless pipe so that if the silicone hose starts to slip the clamps should pull against the welds & stop it from blowing off. Quicker & cheaper than putting a bead on.

Just need to do my bottom hoses now. I'm sure one is leaking!

Just googled the part number for the 90º bend, and found this on seatcupra forum.

http://www.seatcupra...ad.php?t=318413

So for £48 that has to be cheaper than making your own?

So that should replace pipe '2'

Has anyone had any luck with SFS regarding this yet? May be worth setting up a group buy??

Has anyone had any luck with SFS regarding this yet? May be worth setting up a group buy??

Good idea, haven't had much free time at the moment to phone them

Finally done!

Glad you got yours sorted mate looks sweet

Glad you got yours sorted mate looks sweet

Cheers got the silicon hoses straight from ASH, might change the clips to mikalor ones?

Instead of using the bayonet connector at the intercooler can you just put the pipe straight over the fitment?

anyone near there car or know what coupling it is for a BLT engine? well the ASV, as i assume inter cooler top coupling will be the same?

thanks danny

It here all the same as listed on page one