Sticky Knob Problems

[racingclub]

My gear-lever is fine front to back, but really 'sticky' from side-side.

For example, if I select first, then pull the gear-lever back to middle, it stays in the far-left position & does not return to the neutral position. This makes gear changing a real pain sometimes, especially when you are trying to get a move on.

I've put some white grease on the ball under the gator, but didnt really help at all.

[nutters_uclan]

So tempted to reply based on the thread title alone...

[Oet]

i know, isnt it just....

you need to adjust the ends on the selector puck on top of the gearbox, there is a reset guide if you look on ebay, that tells you how to do it.

[vrsmark]

Have you looked at the linkage on top of the gearbox casing below the TIP? There may be an obvious sign of blockage (pipe or hose stuck) or a worn shifter bush? Failing that,maybe the cable could be replaced or lubed?? Let us know what you find mate!!

[pikpilot]

you need to adjust the ends on the selector puck on top of the gearbox, there is a reset guide if you look on ebay, that tells you how to do it.

I guess he meant youtube not ebay

Here is the link for the O2J box:

[Oet]

lol, i did indeed

thanks dude!

[Phil Tomlin]

Hi

I had the same thing & I put a tiny bit of oil around the plastic ball, which worked well that was a couple of months ago still good now

[Raf_]

Hi

I had the same thing & I put a tiny bit of oil around the plastic ball, which worked well that was a couple of months ago still good now

Ooo so a bit of lubricant helps with a sticky knob!

Sorry I couldn't resist lol

Sent from my GT-I9300 using Tapatalk 2