I was asked to help someone who has one of these cars

They have odd idling speed some of the time and revs staying high when coming of the throttle

 

The throttle body was changed and I was asked to do the TBA with my vcds

 

I cleared the faults in the engine after warming the coolant, checked the voltage

 

Went into channel 001 changed to basic settings, doesn't give me the ADP option

 

Even though the engine is switched off, it shows the engine speed around 200rpm

 

I think this is stopping me do the TBA, but how do I get it so it is reset to 0 rpm and why does it show the engine is running when switched off

 

here is an old scan of the car, I will post up the current one soon

 

Saturday,05,February,2011,13:00:49:36687
VCDS Version: Release 10.6.3
Data version: 20101206
0000000000000

 

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Chassis Type: 6U - Skoda Felicia
Scan: 01 03 15 25 41
 
-------------------------------------------------------------------------------
Address 01: Engine        Labels: None
   Part No: 047 906 030 M
   Component: SIMOS 2P           7015 
   Coding: 00000
   Shop #: WSC 00000 
   VCID: 1A3FD4BCAC19

No fault code found.
Readiness: N/A

-------------------------------------------------------------------------------
Address 25: Immobilizer        Labels: 1H0-953-257.lbl
   Part No: 1H0 953 257 B
   Component: IMMO VWZ3Z0Y0001252 V00 
   Coding: 09600
   Shop #: WSC 13765 
   VCID: 2A5F047CFC79

No fault code found.

End   ---------------------------------------------------------------------

 

 

 

try doing a basic settings reset first, basic settings 04, channel 0, read then write