The PMs have been backing up of late and now that the calendars are out of the way and are hanging on walls and sitting on desks all over the country I have the time to put into organsing another badge group buy.

  

Running in the same format as all the previous Group Buys the badges are a flexible self-adhesive backed vinyl printed with the chosen design and finished with a clear resin dome to give a pronounced finish and protection and durability.
They work equally well stuck over the OEM badge or in place of them.
They can also be shrunk down and used as alloy wheel or steering wheel centres too!

Pretty much anything goes - solid flat colours to a coloured vinyl are the best finish but full colour designs can be printed to white vinyl. 
The choice really is yours however a few for inspiration (and if you want any of these designs try to quote what i call them and your colour choice)

Retro

 

Retro in Lime Green & Black

 

 

Autobot Steering whel centre 

also in lime and black

 

 

Skoda Motosport

Custom Full colour designs
(I'd need you to supply "print ready" artwork for something this complex!)

 

OEM Badge minus the green

 

My version of the new 2013 Badge

 

 

Which can be done in whatever colour/colours one fancies

 

 

VRS logo on black alloy centres!


 

Here is a link to the photobucket album where i have dumped most badge artworks and images

feel free to browse and let it guide your decisions

the images should be named just try to use that as what you put on the list

 

PastyBadge Design Gallery

 

However don't feel limited by this collection, and not everything i have produced is in there.

Everything is produced to order so you can be unique or have a badge shown in a different colour combo if required.

 

If you're interested start a list in the normal Group Buy fashion along with the sizing you want.

 

Quote

Quote

Pasty Boy - Retro - Silver on Black - 80mm x2

 

I've done most cars now but it is your responsibility to make sure you request the correct sizing!
As a very rough guide off the top of my head from memory

Fabia & Octy mk1 - 80mm bonnet and boot - 55mm alloy centres
Fabia & Octy mk2 - 80mm boot & 88mm bonnet - 55mm alloy centres
Superb mk1 - 88mm bonnet & 92mm boot
Superb mk2 - 90mm bonnet and boot

If in doubt.... get a ruler out!!

As a guide larger badges are about £10 and the alloy centres around £6 when produced on their own but normally come down to around £6.50 and £4 respectively.

Things like extra colours in the design, larger size, international shipping add to the cost but once the quantity is up to a sizeable amount I will discuss with the printer and sort out pricing and everyone will then get a PM to confirm their requirements, the costs there of, delivery details and payment details.

Once the quantity gets up to enough to warrant the maximum discount (generally around 100 badges) I shall contact everyone via PM to confirm design, sizing and cost; and to request payment.

Once all payments are in I shall hit the button! 

 

Generally these things take a month to go down and then a couple of weeks to be produced and posted

Any questions ask away 

Could you do other sizes? For example something that covers the Ford Oval?

Ovals are not a problem Chris

Oem badge minus the green. 80mm front and rear. 55mm alloy wheel centres x5 to include my spare

I'm showing interest, not decided what I want yet

Yip. Im after wheel centres and key badge. Yet to decide about front ans rears

Do you think you could mock up the new design badge, as shown below, but with a silver centre (instead of green), silver outer and the bit surrounding the centre the same colour as (or as close to) my grill surround please:

Does anyone know the size for the fabia steering wheel badge?

Does anyone know the size for the fabia steering wheel badge?

 

I'm sure it's 80mm but i'll have a scout around.

 

edit: Just read that it's meant to be 55mm.

Wouldn't mind some of the wheel centres in standard silver for the 18" vrs oct 2 wheels

Also a new bonnet and boot badge would be cool too!!

going swimmingly so far

 

1 - P34RC3 - OEM minus Green - 80mm x 2 - 55mm x 4

2 - mushtafa - TBC

3 - Livy - TBC

4 - vRS19TD - 2013 - silver on dark grey - size TBC 

5 - BTS22 - TBC

6 - Paulbrown - TBC

Can I get 2 of the retro silver on black from the first picture 80mm for fabia 1 and a chrome and black autobot steering wheel badge again for a fabia mk1, thanks mate

Carl

Edited 5 August, 201411 yr by Mac9585

1 - P34RC3 - OEM minus Green - 80mm x 2 - 55mm x 4

2 - mushtafa - TBC

3 - Livy - TBC

4 - vRS19TD - 2013 - silver on dark grey - size TBC 

5 - BTS22 - TBC

6 - Paulbrown - TBC

7 - Mac9585 - Retro - Silver on black - 80mm x 2       Autobot - silver on black - 55mm x 1

Brilliant mate, thanks. Look forward to your pm when the numbers are up!

Carl.

BTS22 - 1 x new 2013 badge in fabia mk1 steering wheel size.

4 x alloy wheel centres with BBS logo - colours and size TBC

Can you do 76mm OEM? I am thinking about Skoda badges for my Cayenne wheel centres.

Interested in front and back fabia retro badges black background and as close to viper green as possible for logo

Can I get the oem badges but the silver centre rooster replaced with a black rooster and the bottom design outline replaced in teal if you get me? 80mm x 2, thanks

Edited 6 August, 201411 yr by Steviemk1

Wanting all in 2013 style with red background, not sure on weather to go for black or chrome rooster. so 4x 55mm alloy centres, 1x55mm steering wheel centre and 2x 80mm bonnet and boot. Cheers

Actionslax - OEM 2013 - silver on black - 80mm x2 - 55mm x4

(for Octy mk1 bonnet and boot)

Can you do ones to replace the badges on the keyfob? Think they are around 14mm from memory?

Cheers

Dave.

A few of us had key badges last time

Hey can i get the Retro Holographic blue but with a black background. Front and rear badges for an octy mk1 80mm

Edited 9 August, 201411 yr by teo

Wouldnt let me edit my other post instead but can I get the oem badges but the silver centre rooster replaced with a teal rooster and the bottom design outline replaced in teal if you get me? 80mm x 2, thanks 

1 - P34RC3 - OEM minus Green - 80mm x 2 - 55mm x 4

2 - mushtafa - TBC

3 - Livy - TBC

4 - vRS19TD - 2013 - silver on dark grey - size TBC 

5 - BTS22 - TBC

6 - Paulbrown - TBC

7 - Mac9585 - Retro - Silver on black - 80mm x 2       Autobot - silver on black - 55mm x 1

8 - WaveyDavey - Retro silver on black - 2x 14mm, 1x 42mm and 1x 43mm

 

 

 

 

Cheers

 

Dave.