Fabia 3 retrofit multifunction steering wheel

[daane]

Hi, a couple months ago i bought a fabia 3 whitout mfsw, now i want to retrofit it. I have the buttons from an octavia 3, i can order the wiring from steering electronics to the mfsw, but i wonder wich control device can be coded with the mfsw, i heard there are some who can be coded with it and others who don't. Before i order the wiring i want to be sure...

[glosrich]

Not sure its that easy on these new models.

There is a lot of component protection coded in to stop changes.

Not like the old days Golf mk4 etc you could add and code most things.

[daane]

The problem is not component protection, but some control devices can be equiped and some don't, there is a low version and a high, but i can't find the part numbers of the devices that can be equiped...

Edited 17 January, 2016 by daane

[glosrich]

Maybe message andyvee he knows a lot about coding.

[Fayers]

It's plug and play if the car has telephone. Then the gateway and BCM is high version

Sent from my iPhone using Tapatalk

[daane]

It's plug and play if the car has telephone. Then the gateway and BCM is high version

Sent from my iPhone using Tapatalk

Thank you, the car is equiped with the standard phone. Does it need any coding? Would the mfs buttons frol an 2014 octavia work in this fabia?

[Fayers]

Buy the buttons from the superb 3v. You ned to do some wire work as vell

Sent from my iPhone using Tapatalk

[Greeniak]

Hi, at the beginning sorry for my English.

 

I also want retrofit MFSW in My Fabia III. I have telephone with BT on board.

My BCM is: Part No SW: 6C0 937 087 C.

I bought part: steering wheel: 5E0419091AG with new cable to Airbag supporting MFSW 6C0971584C.

And switches 6C09535513F and 6C0953501P. W/o TRIP. I should now be used on the steering wheel trip.

My fabia has no display DOT MATRIX.

 

So if its Plug and Play,  Which bits in which bytes I should set.

 

Regards

Łukasz

[artanzh]

Hi, at the beginning sorry for my English.

 

I also want retrofit MFSW in My Fabia III. I have telephone with BT on board.

My BCM is: Part No SW: 6C0 937 087 C.

I bought part: steering wheel: 5E0419091AG with new cable to Airbag supporting MFSW 6C0971584C.

And switches 6C09535513F and 6C0953501P. W/o TRIP. I should now be used on the steering wheel trip.

My fabia has no display DOT MATRIX.

 

So if its Plug and Play,  Which bits in which bytes I should set.

 

Regards

Łukasz

Hi there, 

Can you please tell me if you solved this issue since I have exactly the same problem , the difference being that I don't have BT and my radio is SWING (MY16)

Regrads

Artan

[Greeniak]

Hi there, 

Can you please tell me if you solved this issue since I have exactly the same problem , the difference being that I don't have BT and my radio is SWING (MY16)

Regrads

Artan

Hi Artan,

 

Unfortunately, I managed to make only the cruise control retrofit. MFSW 99% BCM needs to upgrade it to 6C0 937 090 C. But as long as the car is under warranty I will not be exchanged BCM.

 

Best ragards

 

Lukasz.

[PixiTrabi]

Hello,

 

My question would be that I hooked the buttons in the cabinet, I activated it in VCDS, but outside the buttons, but they do not react to anything. It's a Fabia 3 Clever 2016. What's the problem with it? What else do you have to do with coding? The buttons are 5E0919719L.

[singh946]

Did anybody get the MFSW fully working in the end? 

[Greeniak]

No, i just buy BCM high version but its to much work for me with replace them. 

[singh946]

1 hour ago, Greeniak said:

No, i just buy BCM high version but its to much work for me with replace them. 

 

Oh no :(

 

My BCM is as shown below  will this work for the retrofit?

 

6C0 937 089B

Address 09: Cent. Elect. (J519)       Labels:| 6C0-937-089-V1.clb
   Part No SW: 6C0 937 089 B    HW: 6C0 937 089 
   Component: BCM PQ26 Hi4R H07 0065  
   Serial number: 001098062538
   Coding: 0F0008404205405303A04080B10703080000D800D6013500000000000000
   Shop #: WSC 73430 790 00043
   ASAM Dataset: EV_BCMA0 004008
   ROD: EV_MQBA0.rod
   VCID: 2F3B11B2C79ECADF371-807A

   Sensor For Anti Theft Alarm System: 
   Subsystem 1 - Part No SW: 5Q0 951 172     HW: 5Q0 951 172 
   Component: Sensor, DWA  005 0315 
   Serial number: 000000000ZY150070WGZ

   Alarm horn: 
   Subsystem 2 - Part No SW: 5Q0 951 605     HW: 5Q0 951 605 
   Component: Sirene, DWA  004 0311 
   Serial number: 00000000000061684715

No fault code found.

 

[Greeniak]

Yes this is high BCM No need replace them. You can retrofit MFSW.

[singh946]

On 08/12/2018 at 07:22, Greeniak said:

Yes this is high BCM No need replace them. You can retrofit MFSW.

 

Thanks for confirming this

 

So just to confirm the parts:

Steering wheel: 5E0419091AG

Cable to Airbag: C0971584C.

And switches 6C09535513F and 6C0953501P? <--- do i need to replace the switches / stalks?

 

Also getting a different steering wheel will I have to worry about Component protection?

Edited 11 December, 2018 by singh946

[Greeniak]

On 11/12/2018 at 10:39, singh946 said:

 

Thanks for confirming this

 

So just to confirm the parts:

Steering wheel: 5E0419091AG

Cable to Airbag: C0971584C.

And switches 6C09535513F and 6C0953501P? <--- do i need to replace the switches / stalks?

 

Also getting a different steering wheel will I have to worry about Component protection?

The is No component protrction in this mod. About the stalks i dont know. 

If You do this MFSW Please give a Feedback. 

[singh946]

9 minutes ago, Greeniak said:

The is No component protrction in this mod. About the stalks i dont know. 

If You do this MFSW Please give a Feedback. 

 

Thank you for confirming this. I will surely make sure to leave feedback. Also to check does the steering wheel need to be from a superb? There are so many variants

[Greeniak]

2 hours ago, singh946 said:

 

Thank you for confirming this. I will surely make sure to leave feedback. Also to check does the steering wheel need to be from a superb? There are so many variants

Should match,5e0419091 letters at the end of the number are specified by colors and buttons.