Fabia VRS Rear Bumper Exhaust

[fox256]

Hello Chaps

Replaced My Rear Bumper Today On My Fabia Elegance 05 For A VRS Rear Bumper

Now I Need An Exhaust Back Box Or Similar

To Finish It Off Does Anyone Have Any Ideas Or will a simple Tail End Do the trick

i only want it to look good and not to fusssed about the cost

thankyou

[devonutopia]

Nip to a powerflow dealer. Is your tailpipe now about 6" too low and sunk back quite far? I know mine was when I did the same trick.

[robby]

Have you got 1 or 2 tailpipes?

i have a genuine Skoda brand new oval trim to fit a twin pipe tailbox (looks same as VRS) - this just clamps on

[fox256]

i only have a single tailpipe coming out of the rear box which point down to the ground so i guess i eill first have to cut it square

then a tailpipe trim will be ideal for what i want

[robby]

This trim is to fit a twin pipe rear box, i suppose you could slide 1 of the fixings over your pipe but i'm not sure if it'll be central though?

[devonutopia]

This is how mine looked with the standard TDI bumper. It was chopped off so the whole backbox came away and the poerflow box & pipes put in their place. £170 all in it cost for the box/tailpipes and fitting.

[fox256]

do they do a list of diffrent back boxes as i would like to try and stay with the VRS style of backbox

[devonutopia]

The backbox is the same, but they have countless styles of tailpipe, in order to retain the vRS trim style.

My local dealer had a rotating stand about 6 foot high (square) and each 6 foot high by 2 foot wide face had loads of tailpipe designs you could pick from. Sure there'll be something vRS like there.

[Mil]

This is a 2.0 Fabia, with the twin-out exhaust from Skoda. Fitted by the dealer using the standard backbox.

[chowy]

Mil, is that the std. Favia vRS tailpipe as the bore seems larger than mine?

Either that or I just haven't looked hard enough:confused:

[Mil]

I have no idea...

[robby]

Thats the trim i have for sale - you can just make out the fixing clamp bolts - looks identical to the VRS standard trim

[chowy]

Thats the trim i have for sale - you can just make out the fixing clamp bolts - looks identical to the VRS standard trim

So this trim is a Skoda accessory? Hmmmm interesting......

I wonder if Blueflame will make an exhaust that this trim will fit onto???

I like the OEM look!

[fox256]

so does anyone have the answer for me will a standard VRS Exhaust system CAT BACK fit as a direct replacement for my fabia elegance exhaust system

if so i will go to my local dealer and order one

CHEERS GUYS

[ftojeTDI]

Where did you buy rear vrs bumper and how much was it? I think it could be found on ebay cheap.

[Mil]

Thats the trim i have for sale - you can just make out the fixing clamp bolts - looks identical to the VRS standard trim

There ain't no bolts dude, it's welded on. It is the same tip the vRS gets.

[Guest Fabia 12v]

All this puts my exhaust trim to shame!! I've got the single pipe accessory trim from skoda

[Phill JK]

You have pm

[robby]

There ain't no bolts dude, it's welded on. It is the same tip the vRS gets.

Sorry - looks like my trim - it slides over the standard pipes and clamps on

here's a link for the Skoda accs -

http://www.skoda.co.uk/skoda3g/content/showroom/accessories/accessories.aspx?model=fabia&category=Exterior%20Styling&subcategory=Exhausts%20and%20Exhaust%20Trim

[Mil]

I've seen this link many times, the first time being when I wanted to buy the pipe two years ago. When I received this pipe, there were no provisions for clamping. I don't know why. So it was welded in. Solid job too.

[gavin iow]

Hello Chaps

Replaced My Rear Bumper Today On My Fabia Elegance 05 For A VRS Rear Bumper

So, if i replaced my VRS rear bumper with a standard (Elegance?) one, could i then fit mudflaps and a tow bar?

[robby]

So, if i replaced my VRS rear bumper with a standard (Elegance?) one, could i then fit mudflaps and a tow bar?

You'd then have to make a cut out for the exhaust

[ftojeTDI]

Anyone wanna exchange vrs bumper for elegance??