Anyone tried these.....Thought's

 

http://www.ebay.co.uk/itm/182089280640?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

Looks dead easy eh, does not show you the ballache removing the old bushes is lol

Can't be that hard.

 

There is a tool online for £30.

 

Just can't see the bush in question being any good?

They are rather cheap. Quality usually comes at a price. Not long ago I had poly bushes fitted to my front wishbones, Powerpro poly bushes. They cost £118 a set. On a previous vehicle I bought a set of Powerflex bushes for the front wishbones. They were about the same price. The ones shown at £45.80, well it's either a real bargain, or poor quality. I know what my guess is!

I would go for super pro ones as they are 2 piece and rotate instead of twisting so superior in design. I think a paid around £112 for the front kit a few years ago and they are still fine after 50k

 

Edited 5 August, 20169 yr by wiilydog

Have had these fitted for the last 4 years and they are still nice and tight with no play

I presume you mean Superpro?

I presume you mean Superpro?

Bloomin heck, I did mean Superpro. I put it down to my age!!!

Looks dead easy eh, does not show you the ballache removing the old bushes is lol

Is it a mare removing the old oem bush? Did my own a few years back on my mk1 vrs and wasn't too bad. Hammer, chisel, drill and some brute force!!

Ibiza Cupra bushes fit and work just fine.

Ibiza Cupra bushes fit and work just fine.

Are these the same as the non void/solid tt/s3 ones, i have got a set of bilstien/febi s3/tt solid ones waiting to go on £25 from ebay .

Superpro are exeptional bushes.

 

We sell a lot of these http://ap-performance.co.uk/suspension-parts/control-arm-lower-rear-bracket-mount-octavia-mk2-2004.html

 

No creaking sqeeking etc which are sometimes complaints with other bushes. Easy to fit.

Thank's everyone think i'm going with the TT one's with no voids.