Audi 2012 S3 - single press unlock all doors

[hutchysrs50]

Today I tried coding a 2012 Audi S3 to unlock all the doors with a single press of the button, it's worked on everycar I've tried but although the coding was accepted it didn't work.

 

I went into 09 central electrics and did the usual single door locking options on coding, then checked on adaption.

 

I got no response from 46 central convenience controller so take it it isn't edited in that.

 

what am I doing wrong?

 

thanks

[old newbie2]

1 hour ago, hutchysrs50 said:

Today I tried coding a 2012 Audi S3 to unlock all the doors with a single press of the button, it's worked on everycar I've tried but although the coding was accepted it didn't work.

 

I went into 09 central electrics and did the usual single door locking options on coding, then checked on adaption.

 

I got no response from 46 central convenience controller so take it it isn't edited in that.

 

what am I doing wrong?

 

thanks

I'm surprised that you need to code this operation.

My 2012 Superb gives me 3 options re. locking / unlocking in the Maxidot, under Settings / Convenience / Central Locking.

Since it 'tis but an 'umble Skoda I'm surprised that said options  aren't available in an Audi S3..............

 

DC

[JWvrs25]

If its any use, my fabia had a problem with the module 46 and it said there was no response from controller, couldn't code anything for the central locking as a result. I had to disconnect the battery for 10 mins then reconnect so the module could reset itself and be read again.

I don't know whether that might be the case or whether it just doesn't have the module fitted.

[Breezy_Pete]

Didn't the Central Convenience module get merged into BCM at some point in history? Don't ask me when, but I'd be surprised if a 2012 car had a separate module 46, does an autoscan try to talk to it?

[hutchysrs50]

They did yeah, but it did show up on the "installed list" just got no communication.

 

ive also coded a 2012 Audi Q7 and 2012 Fabia today which all worked fine (2012 coding day  )