Hi guys

I was trying to do some coding with Obdeleven on my Superb mk3 L&K. Other codings worked fine and I'm satisfied but  I have change something and now im not sure what it was. The issue is my PARK ASSIST (auto parking button) is not working now as im geting message which you can see on attached pic. Im not sure but I hope it is just settings which i need to change to default and it will be ok. Issue is I have been stupid and I didn't save default settings and now im not sure what I changed wrongly.  Is there somebody who is able to help please. Thank you 

I'm sure I read someone on the forum set the distance to the curb low which triggered this, did you change that value?

yes I have tried distance but I put it back again. I will double check. If you know the link could you send it to me

or what shall I search for. Thank you

You should have a log of the coding you have done and things you have changed. You can find that if you go to "Garage->Your vehicle->History". 

Yes +1 on Puuriit comment.

You should have a full history of what has changed in the app and it is easy then to change it back to the original settings one at a time by working backwards.

Thank you for advices will try and let you know if I was successful 

Hi guys I have checked my history log ons and still no idea what I done wrong. I have set distance from curb to 15cm as it was original one and nothing, I found some option which was asking me about vehicle size I will try this next time or do you think I need to download some software. One more thing I tried watch tv and it didn't work, I did factory reset an nothing. Any suggestions. Please see attached history log ons file , if you could help me find where did i make mistake. Thank you

history.txt

I'm not sure what I'm doing wrong here. Tv is working fine now after reset but what is not, it is when reversing, I cant see visuals of parking assist on my columbus screen and i put everything how it should be. I guess it will be some small think which I'm missing as normally it always is. I tried those dimension settings for vehicle but no change at all. help please

Thank you guys for your help, this issue is fixed now.

What did you do to fix it?

I got correct coding for that

So did it need a dealer or did you do it yourself? It would help others if you can say what the wrong coding that you put right was.

I did it with help.

Please see attached correct coding.

Set that value:
*******************************************************************
Adaptation
    Control unit: 76 Parking Assistance
    Name: Switch-on speed for parallel parking assist
    Values: 
            NEW value: 37 km/h
*******************************************************************
Adaptation
    Control unit: 76 Parking Assistance
    Name: Switch-off speed for parking assist
    Values: 
            NEW value: 15 km/h
*******************************************************************
Long coding
    Control unit: 76 Parking Assistance
   NEW value:
        0371067851
*******************************************************************
Long coding
    Control unit: 76 Parking Assistance
    Values: 
        Trailer positioning assistant: 
            NEW value: not installed
*******************************************************************
Adaptation
    Control unit: 76 Parking Assistance
    Name: Distance to curb
    Values: 
           NEW value: 20 cm
*******************************************************************
Long coding
    Control unit: 76 Parking Assistance
    Values: 
        Visual display for park assist: 
            NEW value: with OPS 360°
*******************************************************************
Long coding
    Control unit: 76 Parking Assistance
    Values: 
        Camera type: 
            NEW value: not installed
*******************************************************************
Long coding
    Control unit: 76 Parking Assistance
    Values: 
        Links-Rechtsverkehr: 
            NEW value: Left hand driv.
*******************************************************************
Long coding
    Control unit: 76 Parking Assistance
    Values: 
        Parking aid: 
           NEW value: PLA
*******************************************************************
Long coding
    Control unit: 76 Parking Assistance
    Values: 
        Start-stop function, coding information: 
            NEW value: Start-stop function in control module not active
*******************************************************************
Adaptation
    Control unit: 76 Parking Assistance
    Name: Acoustic warning for rear lid assistant
    Values: 
           NEW value: not active
*******************************************************************
Long coding
    Control unit: 76 Parking Assistance
    Values: 
        Limited operation: 
            NEW value: Not available

Help was provided by guys from link below. You can contact them if you need some help.