Andy230's Octy II VRS

[Andy230]

Added full TPMS. Got custom profile on there thanks to @langers2k. The correct TPMS unit is the hardest to find. Cheap sensors can be had via programmable Autel MX-sensors

[Andy230]

Added front parking sensors 

[Nuclear_Jules]

Nice retrofits was taking the bumper off difficult to fit the front sensors? 

[Andy230]

No the only pains were the 3 rivets under the bumper. You need to pull the top off first and be gentle then it'll come out easily. The rest are straight forward just screws. It's better done as a 2 man job but can be done with one person. I chickened out and used a cutter for sensors (http://www.sealey.co.uk/PLPageBuilder.asp?gotonode=ViewProduct&method=mViewProduct&productid=20339&productdescription=Parking aid cutter&productcode=&category=0&catgroup=&catmicrogroup=&analysiscode=&requiredresults=16)

[Nuclear_Jules]

How does the vents/storage compartment come out I like the charge points in there.

 

how do the pressure sensors in the valves feed the data to the maxidot?

 

need to get the engine fixed then mod time can start, I have the parts for folding mirrors and just need the loom and level sensors for factory xenons.

Edited 23 October, 2018 by Nuclear_Jules
Typo