I have 2009 mk2 octavia with 4 spoke basic steering wheel, attached 1. I would like to install the VRS upgrade (3 spoke) with a multifunction option, attached 2. I wanna make sure that the 1K0953549CH steering column control will support this option, attached 3. Please note that the new steering wheel has the multifunction and shifting pedals options.  

 

Thanks, 

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

 

That list details all the module numbers, I am unsure if your new wheel is a mid line or high line, I should think its a highline having the flappy paddles.

Does your car have the cruise control on the stalk?

I hope this points you in the right direction.

On 21/11/2018 at 17:12, Johnaldridge101 said:

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

 

That list details all the module numbers, I am unsure if your new wheel is a mid line or high line, I should think its a highline having the flappy paddles.

 Does your car have the cruise control on the stalk?

I hope this points you in the right direction.

Thank you for this useful piece of information!

That MFSW looks to be from a Fabia as it only has buttons on one side.

 

I've no idea if the Fabia buttons are compatible with an Octavia.

CH controller is good for MFSW, as I understand it.  @Eddie-NL can confirm

Ok, but how about the steering wheel. It's been taken from Fabia and I am gonna out it in Octavia 2.

 

Thanks!

On 06/12/2018 at 18:29, mrhappy said:

CH controller is good for MFSW, as I understand it.  @Eddie-NL can confirm

 

Confirmed with RCD330, too?