Where would I be able to get aftermarket buttons that fit in the empty places around the gear lever (picture 1), and how much is prepared for adding new functions. I am planning on adding a LED-bar and want to make a main breaker for it look like it belongs in the car. So what I want to know is if anyone else has done a similar operation and where I could find buttons that fit either with icons like in picture two or just blank ones that you can add the symbol on yourself.

Can’t help specifically for the mk3 (I have one now but haven’t done anything on it like this) but I found the TPMS button for my old mk2 on AliExpress which fitted perfectly and worked fine.

probably worth a look on there but no idea what type of logo you would find to suit your particular project from the original buttons that would have been fitted there....

@Gleisner95

modify current ones:

-> https://www.briskoda.net/forums/topic/483226-fit-switch-next-to-gear-lever/?tab=comments#comment-5426271

 

On 26/10/2020 at 08:31, MartiniB said:

@Gleisner95

modify current ones:

-> https://www.briskoda.net/forums/topic/483226-fit-switch-next-to-gear-lever/?tab=comments#comment-5426271

 

Thanks a lot! This will be very helpful.

 

On 26/10/2020 at 00:08, SkudMissile21 said:

Can’t help specifically for the mk3 (I have one now but haven’t done anything on it like this) but I found the TPMS button for my old mk2 on AliExpress which fitted perfectly and worked fine.

probably worth a look on there but no idea what type of logo you would find to suit your particular project from the original buttons that would have been fitted there....

It does seem like they are a lot easier to find for the Mk2 but I'll try looking, thanks!

 

Right now it seems like the most viable option is to find a button assembly on AliExpress or something and maybe have someone 3d-print a cap with the right logo in a way that it lights up like the stock buttons!

 

And if I understood some other threads right the easiest way to wire it is probably by programming an extra output from the Can-modules to feed the relay for the extralight.

 

Thanks a lot guys!

24 minutes ago, Gleisner95 said:

maybe have someone 3d-print a cap with the right logo in a way that it lights up like the stock buttons!

 

by info in link i posted above, this were made from original blank button