Hello,

 

I have problem with my car. Car does not start. I send video and full auto scan from from Vag. I think there will be problem with power supply but battery is full charged. I try new battery but problem is too same. Can you help me? Thanks 🙂

 

 

VAG full scan: vypis.txt – OneDrive (live.com)

Edited 13 September, 20214 yr by john999boy
Embedded video

Well, that's not good.  I've never seen an "Engine could not be reached" error.  It means that the ECU (Electronic Control Unit) cannot see the Engine control unit.  Ignore the ABS fault - that is around battery voltages which would probably clear.

I would want to check the wiring harnesses to the engine to make sure the mice or rats have not done their worst.  Keep us posted.

Hello, so I replaced the battery and the car started. I drove about 1 kilometer and the car turned off the engine again. After diagnosing VAG, I replaced the throttle with a new one, but the problem is the same again. Can the engine control unit be defective? I'm sending an extract from VAG.

log.txt

Heck - that's not good.  All Priority 2 faults - the worrying one from me is no coolant flowing and that will cause the engine to shutdown.  You might want to look at that as a first starting place.