I saw the video that shows how to connect rvc to mk3 and I got no image on my display. Any thoughts or suggestions?

 

Youre gonna need to supply a lot more detail than that.

 

- what camera did you fit

- where did you get it

- what radio you have

- lowline or highline camera

- who fitted it

- was it coded correctly

- where was the power/ground taken from

- fault codes

 

Once all of this is answered we might be able to offer some assistance

PHello and a happy new year. I fitted a camera that I bought from AliExpress for 20 euros. I got the bolero. I will attach Fotos. I fitted the camera.the coding was done from my mechanic. When I put the car in reverse I get a black screen and adjustments for brightness etc. And the warning down below.i don't know what is a high line or a low line camera. The ground was taken from the metal surface of the inside of the trunk. I get no fault codes.

I can only imagine that if the coding was done wrong I wouldn't get the screen I get when I put in reverse. I mean it corresponds to the shifting and I get the adjustments. 

A 20 euro camera is not gonna be any good really... I doubt it has the correct wiring and setup for your car.

 

When I connect it to a simple 5 inch monitor I have image . I mean it sends image but for some reason it won't send image to the CD module. I did the blue interface connection and all and I tried to get positive from the module but it sends only 7.5 volts. . I would really appreciate of you could send me some kind of drawing as to how a correct connection should be. At this point I would like to tell you that I really appreciate you taking the time to help.

Could be a NTSC vs PAL issue.

 

Can't remember which you need I'm afraid...

It's NTSC. Maybe ..... But in that case I have seen a video on utube that I would get image but extremely flickering. If it was giving a PAL signal. It's been driving my crazy for a while now. And since I'm working insane hours I don't really want to go to SKODA DEALERSHIP cause they charge an arm and a leg. So pretty much I rely on you guys to give a helping hand. If you can of course. It's frastrating cause I did the wiring myself spending 3 hours just to get the cables from the trunk to the dash. 

21 minutes ago, sharkee said:

It's NTSC. Maybe ..... But in that case I have seen a video on utube that I would get image but extremely flickering. If it was giving a PAL signal. It's been driving my crazy for a while now. And since I'm working insane hours I don't really want to go to SKODA DEALERSHIP cause they charge an arm and a leg. So pretty much I rely on you guys to give a helping hand. If you can of course. It's frastrating cause I did the wiring myself spending 3 hours just to get the cables from the trunk to the dash. 

Skoda dealer wont touch a aftermarket reverse camera, they will simply say rip it out and fit genuine. And thats exactly what id recommend to be honest

 

If I had the money and time trust me I would have done it by now.