VCDS adaptation - Traffic Sign Recognition - Activation - FL MY18 245 vRS - Working

Maybe I'm thick but struggled a fair bit with various instructions getting this particular one to work so thought I'd write my own and share whilst it was still fresh in my mind.

My vehicle is a late 2017 FL 245 vRS estate fitted with Amundsen MIB2 (I think) 5Q0035874C S/W-0468

I has previously activated HBA & already had lane assist

Tested so far, under vehicle settings I can enable disable TSR and enable over speed warning and set the amount over the speed I want the warning to occur. (2 new options and a slider)

Also Trailer recognition and options are new to me I think.

Instrument cluster display shows traffic sign top centre. navigation direction arrow moves to bottom right. This disappears if you choose the driving information variable display.

Main navigation gets a speed sign, dunno if that's new cant remember.

I do get a pop up warning if I exceed the selected over the limit limit, presume I'll get an auditable tone with different option selected.

Yet to have a proper drive with it so will report back when I have if anything isn't working as it should (ref page 185 Owner's manual)

This is all definitely just from Nav map data so far as it hasn't 'clapped eyes' on a real road sign yet

Step 1.
Module 5F - Information Electr

Adaptation
Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21 - Activated

Car_Function_Adaptions_Gen2-menu_display_road_sign_identification - Activated

Car_Function_Adaptions_Gen2-menu_display_road_sign_identification_over_threshold_high - Activated

Step 2.
Module A5-frt Sns. Drv. Assist
Security access - 20103
Control unit Long Coding
Byte 16,Bit 04, Activate

Step 3. 
Module 17-Instruments
Long Coding - Byte 5, Bit 02, Traffic Sign Detection, yes, Activate, plus check the soft reset checkbox.

Done.