I'm thinking of getting a cobra exhaust and I was just wondering if anyone else has fitted one? I can't see any information about how it joins to the car. I know you need to cut the factory pipe but does it come with a step ip from 55mm to 63? Thanks in advance

Ask the place that sells them.

@Ant-Vrshad a Cobra fitted but has not signed in for a long time.      http://cobrasport.com/collections/skoda-fabia-exhaust

 

http://briskoda.net/forums/topic/376216-fabia-vrs-exhaust

http://briskoda.net/forums/topic/418477-cobra-sport-cat-back-exhaust-system

http://briskoda.net/forums/topic/435624-mk2-fabia-vrs-exhaust

http://briskoda.net/forums/topic/425186-exhaust-for-fabia-vrs-tsi

 

 

For anyone wondering, the exhaust comes with a 55 to 63.5mm joiner.

37 minutes ago, TheGreenPeople said:

For anyone wondering, the exhaust comes with a 55 to 63.5mm joiner.

 

Doesn't look like a performance solution to me, looks more like a convenient kludge to allow the use of cheaper 2 1/2" tubing, more show than go I suspect.

I mean, it's a 1.4, anything more than 2.5in is more than likely a waste of metal IMO. The performance aspect (if any) would come from having a straight through back box instead of the factory which loops back on itself and contains several baffled Chambers. I'm not looking to push 1000hp, just want a bit of noise going down the road 😄

22 minutes ago, TheGreenPeople said:

I mean, it's a 1.4, anything more than 2.5in is more than likely a waste of metal IMO. The performance aspect (if any) would come from having a straight through back box instead of the factory which loops back on itself and contains several baffled Chambers. I'm not looking to push 1000hp, just want a bit of noise going down the road 😄

 

The standard 2 1/4" system is good to about 220 BHP so if you want more noise, just change the back box for a straight through type, no need to touch the rest of the system.