Will get some photos as I forgot to take em when changing them 🤣🤣,, only thing I forgot to do was put the new dust shield on drivers rear 🤣🤣,,, you know the one that was missing when I checked the rear disc size and noticed it missing 🤣🤣

ended up putting M-tec drilled and grooved discs all round and EBC ultimax pads on the front and mintex on the rear, full clean up and silicone greased slider pins,, but I did notice my passenger side CV boot I has a small split so that’s me next job 

Where did you buy the parts from? I've got some yellow stuff rears hanging about to shot in mine. I went to do mine today, got the fronts done but parts gave me the wrong discs for rear 😢 been waiting 10 days for them I even told them the sizes and everything fecking useless.

46 minutes ago, Blue8793841 said:

Where did you buy the parts from? I've got some yellow stuff rears hanging about to shot in mine. I went to do mine today, got the fronts done but parts gave me the wrong discs for rear 😢 been waiting 10 days for them I even told them the sizes and everything fecking useless.

Mine where just from fleabay captain,, £180 for discs £62 for front pads £31 for dust covers and yeah I had to measure the rear discs as I wasn’t sure if they were 272mm or 282mm as always mine were the dearer 282mm 🤣,, always use the EBC ultimax I think they do make a difference over standard but that’s just that placebo think more than likely 🤣🤣,, things left to do CV boot,, EGR cooler, turbo actuator and the piggin P2015 inlet bank 1 AGAIN 🤣🤣

Is yours a diesel then? What's wrong with turbo actuator?

9 hours ago, Blue8793841 said:

Is yours a diesel then? What's wrong with turbo actuator?

Yeah she’s a derv,, can’t remember the code but she’s sticking assuming it’s just a tad hard for it to pull it so throws up the code, she still boosts and on the odd occasion she will go into limp mode until I do ignition off/on