Skip to content

Octavia dash functions and cruise control

Featured Replies

Hi

I have a 2010 Octavia 1.6TDI CR which I believe to be the base model.

My dash display tells me outside temperature and trip...that is all.

The car has no cruise control on the light stalk or extra buttons on the wiper stalk, can I change the stalks for ones with the extra buttons, and will doing so allow me to do more with the dash and have cruise control?

Thanks in advance!

Hi, to be completely sure, I advise you to do a complete autoscan via VCDS to determine which module and unit you have and determine what parts you will need (for example, there are two types of stalks, one composed of two singular stalks, and in this case, the needed one is just the left, and the other case is just a single assembly) just to understand how to proceed. Because looking online, it seems for the mid and high trim, the stalk replacement and coding are all that are needed, but I believe in your case, also some wiring will be needed. Online, and on Briskoda, there are a lot of guides.

For example, here there is some useful info:

https://www.briskoda.net/forums/topic/307988-retrofitting-cruise-control/?fromsearch=1

  • Author

Thanks for coming back to me, I have managed to go and do a scan as follows...

Chassis Type: 1Z-SK35 (1K0)

Scan: 01 03 08 09 10 15 16 17 19 25 42 44 46 52 56

VIN: TMBJT21Z7A2124342 Mileage: 225500km-140119miles

01-Engine -- Status: OK 0000

03-ABS Brakes -- Status: OK 0000

04-Steering Angle -- Status: OK 0000

08-Auto HVAC -- Status: Malfunction 0010

09-Cent. Elect. -- Status: OK 0000

10-Park/Steer Assist -- Status: OK 0000

15-Airbags -- Status: OK 0000

16-Steering wheel -- Status: OK 0000

17-Instruments -- Status: OK 0000

19-CAN Gateway -- Status: OK 0000

25-Immobilizer -- Status: OK 0000

42-Door Elect, Driver -- Status: OK 0000

44-Steering Assist -- Status: OK 0000

46-Central Conv. -- Status: OK 0000

52-Door Elect, Pass. -- Status: OK 0000

56-Radio -- Status: OK 0000

-------------------------------------------------------------------------------

Address 01: Engine (J623-CAYC) Labels:. 03L-906-023-CAY.clb

Part No SW: 03L 906 023 AG HW: 03L 906 023 AG

Component: R4 1.6l TDI H23 9979

Revision: --H23--- Serial number: CVN: 433ED292

Coding: 00114014030500080000

Shop #: WSC 73430 031 00999

ASAM Dataset: EV_ECM16TDI02103L906023AG 003014

ROD: EV_ECM16TDI02103L906023AG_003.rod

VCID: 6BD572AB8285F9CE06-803E

VINID: 91D49A90206A1D10810840C40892846E10

No fault code found.

Readiness: 0 0 0 0 1

-------------------------------------------------------------------------------

Address 03: ABS Brakes Labels:. 1K0-907-379-MK70M.clb

Part No SW: 1K0 907 379 AK HW: 1K0 907 379 AK

Component: MK70 M MASR 0105

Revision: 00H35001

Coding: 0017665

Shop #: WSC 73430 790 00999

VCID: 7BF542EB3AE5694E96-802E

No fault code found.

-------------------------------------------------------------------------------

Address 08: Auto HVAC (J301) Labels:| 3C8-907-336.clb

Part No SW: 3T0 820 047 M HW: 3T0 820 047 M

Component: Climatic 150 0303

Revision: 00006001

Coding: 0000000002

Shop #: WSC 73430 790 00999

ASAM Dataset: EV_Climatic A01005

ROD: EV_ClimaBasis_SK35.rod

VCID: 397998E3B8599B5EC4-806C

1 Fault Found:

9481200 - Refrigerant Pressure

B10AB F0 [00001001] - Too Low

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Priority: 2

Fault Frequency: 1

Reset counter: 239

Mileage: 225508 km

Date: 2025.06.03.

Time: 13:09:15

-------------------------------------------------------------------------------

Address 09: Cent. Elect. (J519) Labels:. 1K0-937-08x-09.clb

Part No SW: 1K0 937 085 D HW: 1K0 937 085 D

Component: BCM PQ35 B+ 103 0575

Revision: 00103 AG

Coding: 48180AB8B0050CB04010008001000024430000AE424D81605C4440000000

Shop #: WSC 73430 790 00999

VCID: 306FA5C763235A1673-8064

Subsystem 1 - Part No: 1Z2 955 119 C Labels: 1KX-955-119.CLB

Component: Wischer 29041 22 0601

Coding: 00D7B7

No fault code found.

-------------------------------------------------------------------------------

Address 10: Park/Steer Assist (J446) Labels:. 1Z0-919-475-V1.clb

Part No SW: 1Z0 919 475 B HW: 1Z0 919 475

Component: PARKHILFE 4K H06 0006

Revision: -------- Serial number: 66641011806276

Coding: 100001

Shop #: WSC 73430 790 00999

VCID: 408FF507D383CA9683-8014

No fault code found.

-------------------------------------------------------------------------------

Address 15: Airbags Labels: 1K0-909-605.lbl

Part No SW: 1K0 909 605 T HW: 1K0 909 605 T

Component: Q4 AIRBAG VW8 020 2300

Revision: 05020000 Serial number: 0038PD2LSLVN

Coding: 0020788

Shop #: WSC 73430 790 00999

VCID: 3D718CF36471A77EE8-8068

Subsystem 1 - Serial number: 6332MSME52724D52B

Subsystem 2 - Serial number: 6342MSME35312614/

No fault code found.

-------------------------------------------------------------------------------

Address 16: Steering wheel Labels: 1K0-953-549-MY9.lbl

Part No SW: 1K0 953 549 DA HW: 1K0 953 549 DA

Component: J0527 053 0111

Coding: 0000002

Shop #: WSC 73430 790 00999

VCID: 74E769D717BB2636D7-8020

No fault code found.

-------------------------------------------------------------------------------

Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1

Part No SW: 1Z0 920 903 G HW: 1Z0 920 903 G

Component: KOMBI H06 0305

Serial number: 00000000000000

Coding: 410300

Shop #: WSC 73430 031 00999

ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04052

ROD: EV_Kombi_UDS_VDD_RM09_004_SK35.rod

VCID: 397998E3B8599B5EC4-806C

No fault code found.

-------------------------------------------------------------------------------

Address 19: CAN Gateway Labels:. 1K0-907-530-V4.clb

Part No SW: 1K0 907 530 AD HW: 1K0 907 951

Component: J533 Gateway H16 0233

Revision: H16 Serial number: 4520K105060244

Coding: E9A01F06000202002303

Shop #: WSC 73430 790 00999

VCID: 69D908A34079EBDE74-803C

No fault code found.

-------------------------------------------------------------------------------

Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb

Part No SW: 5K0 953 234 HW: 5K0 953 234

Component: IMMO H06 0305

Serial number: 00000000000000

Coding: 000000

Shop #: WSC 00000 000 00000

ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03005

ROD: EV_Immo_UDS_VDD_RM09_VW21.rod

VCID: 6ADB77AF8D7FE0C67D-803E

No fault code found.

-------------------------------------------------------------------------------

Address 42: Door Elect, Driver Labels:. 1K0-959-701-MIN3.clb

Part No SW: 1T0 959 701 T HW: 1T0 959 701 T

Component: Tuer-SG 009 2114

Coding: 0000564

Shop #: WSC 73430 790 00999

VCID: 489FED273BB3F2D64B-801C

No fault code found.

-------------------------------------------------------------------------------

Address 44: Steering Assist Labels: 1K0-909-14x-GEN3.clb

Part No: 1K0 909 144 J

Component: EPS_ZFLS Kl. 68 3001

Revision: 00H17000

Shop #: WSC 73430 790 00999

VCID: 3169A0C3A829531E7C-8064

No fault code found.

-------------------------------------------------------------------------------

Address 52: Door Elect, Pass. Labels:. 1K0-959-702-MIN3.clb

Part No SW: 1T0 959 702 D HW: 1T0 959 702 D

Component: Tuer-SG 006 1204

Coding: 0000564

Shop #: WSC 73430 790 00000

VCID: 397998E370599B5EC4-806C

No fault code found.

-------------------------------------------------------------------------------

Address 56: Radio (J503) Labels:. 5M0-035-1xx-56.clb

Part No SW: 1Z0 035 161 G HW: 1Z0 035 161 G

Component: Radio-SWING 009 0030

Revision: -----12S Serial number: SKZ4Z2K1202093

Coding: 080002000001

Shop #: WSC 73430 790 00999

VCID: 326BAFCF6D2F680605-8066

No fault code found.

Also did a scan on just 17...

Address 17: Instruments

Control Module Part Number: 1Z0 920 903 G

Component and/or Version: KOMBI H06 0305

Software Coding: 110300

Work Shop Code: WSC 73430

VCID: 397998E3B8599B5EC4-806C

Advanced Identification/FAZIT

Serial number: 00000000000000

Identification: VD1-048

Date: 05.05.10

Manufacturer number: 5250

Test stand number: 4941

Flash Status

Programming Attempts(application): 0/0/5/0/0/0/0/0/0/0

Successful Attempts(application): 0/0/0/0/0/0/0/0/0/0

Programming Status: 00000000

Flash Date: 00.00.00

Software

OSEK-OS: 03.14.00

HiSpd Net: 01.10.00

Misc.

Hardware number: 1Z0 920 903 G

Workshop System Name: J285

Equipment/PR Code: 2D2D2D2D2D2D2D2D

Dataset Number: -----------

Dataset Version: ----

End of Line Equipment Level: ------------------

ASAM Dataset: EV_Kombi_UDS_VDD_RM09

ASAM Dataset Revision: A04052

Car Info

Chassis Number: TMBJT21Z7A2124342

VCDS Info:

VCID: 397998E3B8599B5EC4-806C

Labels: 5K0-920-xxx-17.clb-SRI1

ROD: EV_Kombi_UDS_VDD_RM09_004_SK35.rod

Hopefully this is of use!

Thank you, (I've run the VIN via skodaparts to check the components). Judging just by the number of pins between your steering unit 1K0 953 549 DA and the other available (medium and high versions), there are a lot of pin differences. I've found this website that sells the CC retrofit kit where you can ask for info about:

https://wibutec-shop.com/Retrofit-kit-GRA-cruise-control-system-Skoda-Octavia-1Z-from-02-2004-to-05-2010

If you enter your VIN code, the price will go up to €364 because you don't have a multi-function display, which is related to the steering module (cruise control MFSW, etc.), so I believe the retrofit kit will include the module, stalk and wiring.

Also, considering the fact that you have access to VCDS, see if you can enable it just out of curiosity, but I am really sure that it will not work.

  • Author

Thankyou so much for doing all that for me, looks like I will probably give up on the cruise control dream, dont really want to start pouring money into the old girl!

Just to tick the box, what option would I be enabling in VCDS?

Any idea about the dash display and if there's a way of it showing things like consumption, not just the outside temperature?

You're welcome, happy to help. You can try to ask that company and see what they say, and if they give you any part number or idea of what you need, you can look for them used on eBay or a local scrapyard. For the cluster function on the VCDS "home page" there is the cluster menu called 17 - Instrument. In my Fabia (I've done a lot of upgrades and retrofits like rear electric windows), for example, I've managed to modify the service interval from 15k km to 10k km (I prefer to do the service earlier to preserve the timing chain and general engine life) and also to enable the washer fluid warning light (one wire to the cluster and the sensor in the washer bottle), and enabling the liter of fuel that is needed to fill up or needle sweep. That's just for the cluster. I don't have the Maxidot, so the functions are a bit limited. You can also look for other modules, especially for the comfort module / central electrics, to enable other functions like opening the window by pressing the unlock button on the keyfob and things like that, also in the abs module I'm not sure if you have a newer gen of abs unit, but you can try to look for tpms (it uses the abs sensor to determine the tire rotation to detect if all the wheel are rotating the same way if not there is an air leak and the warning light turn on but the only way to reset it is via vcds or retroffitting the switch) and also automatic hill hold if you are stopped up hill or down hill while having clutch and brake pressed the car stay stand still for about 3 to 4 second allowing you to move without the handbrake method (I've learned that way, but some electronic helping is not always bad).

For the temperature depends on whether there is a thermometer (installed probably yes) and for fuel consumption, I believe it is possible.

Edited by Jack25

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.