fitted this today what do you think:confused:

its and auto gauge, boost gauge with a smoked face, looks blank with the power off and turn the key and it all comes to life, just like a defi gauge but much cheaper!

i decided to put it in the air vent but i used a carbon fibre plate to match the rest of the interior:cool:

Nice work.

Looks good mate, I have never been keen on the vent but its deffo a decent slot for it, Im after the set of 3 for the hole under the stereo, Can I find them? NOPE.

Looks good mate, I have never been keen on the vent but its deffo a decent slot for it, Im after the set of 3 for the hole under the stereo, Can I find them? NOPE.

they are on ebay now

Linkage!

this guy has most gauges you could want and is very reasonably priced,

eBay.co.uk Shop - MOST WANTED AUCTION: Auto Gauge: AUTO GAUGE COMBO 3 x 2 52mm 7 LED LIGHT GAUGE

give us a minute (due to thunder internet is running crap) and i'll find the pod

and here is the link for the pod eBay.co.uk: 2" GAUGE POD TO FIT IN STANDARD RADIO SLOT (3 GAUGE ) (item 140129552729 end time 25-Jun-07 16:47:33 BST)

I think you could probally sell your vent too, they seem to be in big demand if their intact.

Whats involved in fitting a boost gauge.

How many Haynes Spanners would you give it ?

Damn your good, ta very much mate

i dont think its difficult anyone who can use a screwdriver should be able to do it,

it just depends on where you going to fit it, most boost gauges come with a bit of fitting kit like mine came with a t peice and vacum hose,

all you need to do it t of the vacum hose then wire in the electrics (mine had three wires)

how much would i get for the vent as thats in perfect condition?

wow, thats a beautiful gauge! id like a boost gauge in mine as a stand alone unit but i cant think where to put it. id like to put 2 in the ash tray in the front but cant think how to work it, stealth gauges!

someone on here has put a gauge in their ash tray, i cant remeber the name but its a nice black vrs

do a search for gauege and you should fine theri post as hes put pics up

thanks for the feedback guys:thumbup:

is it EddyH

Damn your good, ta very much mate

no probs mate, dont mind searching for others it stops me spending

Whats involved in fitting a boost gauge.

How many Haynes Spanners would you give it ?

Well i managed to fit one and it works!!!!!!

So it can't be that difficult if you wanna know get in touch you know where i am mate:)

Well i managed to fit one and it works!!!!!!

So it can't be that difficult if you wanna know get in touch you know where i am mate:)

Oh yeah i forgot, you did yours. i remeber seeing it now.

If you can, could you take a picture of the T piece part for me.

If you can, could you take a picture of the T piece part for me.

I shall see what i can do later but it is pi55ing down in cardiff today

I have the 3x gauge holder that fits beneath the stereo on the vRS. Now I just need an AFR, EGT and Boost Gauge.

I shall see what i can do later but it is pi55ing down in cardiff today

Nice one:thumbup:

Looks good,i have my boost gauge in the same location and have oil temp and oil pressure below the radio and volt meter in the ash tray

Where did you bought the piece that holds the gauge and fits in the air vent?

It looks very good.

I have mine (boost gauge) fitted in a pod on top of the ignition cowling, it does not obstruct your vision or any warning lights etc. and it does mean you don't have to look too far out of your field of vision to observe your boost readings etc.

http://www.briskoda.net/forums/attachments/14224d1175625258-dsc00950.jpg

Oil temp, oil pressure and battery volts gauges are under the stereo. The oil temp and pressure are useful but the battery gauge is only there to fill the hole tbh!!

i brought it from halfords, they didnt have it in stock but it was in one of their boy racer catalogues to order

it comes with the hole cut and is 120mm x 150mm so can be cut to what size you want, i think the do it in just black too if you dont want carbon